渐开的英文

• involute

• "渐"英文翻译    gradually; by degrees
• "开"英文翻译    open; turn on; switch on; be ...
• "渐开的" 英文翻译 :    involute
• "渐开线" 英文翻译 :    [数学] evolvent; involute
• "齿轮渐开线" 英文翻译 :    the involute master of gear
• "渐开均压线" 英文翻译 :    involute equalizer
• "渐开螺旋面" 英文翻译 :    involute helicoids
• "渐开曲线" 英文翻译 :    involute curve
• "渐开线，渐伸线" 英文翻译 :    involute
• "渐开线齿" 英文翻译 :    involute teeth; involute tooth
• "渐开线齿廓" 英文翻译 :    involute profile
• "渐开线齿轮" 英文翻译 :    involute curfe; involute cylindrical gear; involute gear; involute tooth gear
• "渐开线齿面" 英文翻译 :    involute flank
• "渐开线齿条" 英文翻译 :    involute gear; involute rack
• "渐开线齿形" 英文翻译 :    involute profile
• "渐开线方程" 英文翻译 :    involute equation
• "渐开线规" 英文翻译 :    involute compasses
• "渐开线滚刀" 英文翻译 :    involute hob
• "渐开线函数" 英文翻译 :    involute function
• "渐开线花键" 英文翻译 :    involute serration; involute splines
• "渐开线锯齿" 英文翻译 :    involute serration
• "渐开线拉刀" 英文翻译 :    involute spline broach
• "渐开线轮齿" 英文翻译 :    involute wheel tooth
• "渐开线啮合" 英文翻译 :    involute gearing; involute tooth system; involute toothing
• "渐开线铁心" 英文翻译 :    evolute core

• Study and application of the involute arc of the starting curve line
  弯道起跑线渐开弧的研究与应用
• Research of the non - involution characteristic of thermal deformation gear
  标准渐开线齿轮热变形时的非渐开特性研究
• Grinding gear with the toroidal involute interior thread worm grind wheel is a new kind of process in hard surface gear finish machining
  渐开面包络环面内螺纹蜗杆砂轮磨齿，是一种硬齿面齿轮精加工的新型工艺。
• The dynamic tensile stresses of earthquake may balance or exceed to the precompression stresses due to static watef , this may arouse opening of joints along the normal direction . if the altemate actions of earthquake join , the joints may behave gradual opening and closing
  由于地震作用时的动拉应力将抵消并超过静载作用下的压应力，导致横缝面沿法向张开，加上地震的交变作用，横缝可能会呈现反复的“渐开渐合”现象。
• The process has an advanced principle . the involute hourglass worm drive can realize the design machining of gear form and direction , and the internal meshing honing gear has high efficiency . this process has all merits mentioned above , and also has the advantages of quality stability , high productivity for rude and finish machining
  该工艺原理先进，它集有利于实现齿形、齿向设计加工的渐开面环面蜗杆传动与高效的内啮合珩齿的优点与一体，对齿轮的粗、精加工都有质量稳定、生产效率高的优点。
• Equations of mesh , shorting contact line , undercutting limit line , meshing limit lines and the existence conditions , angle between the direction of relative speed and the direction of contact line , induced normal curvature about every point on the contact line are established . moreover , the paper also theoretically analyzed the error of the grinded gear surface . on the basis of the theory , the computer program is worked out to automatically produce the contact line and the boundary curves of mesh . analysis of meshing circs under different parameters can be done so that we can gain the best process condition
  首先对渐开面二次包络理论进行了深入的探讨，推导出了两次啮合的啮合方程式、瞬时接触线方程式、根切界限线方程式、啮合界限线的方程式及其存在条件，相对运动速度方向与接触线方向的夹角及接触线上各点的诱导法曲率；此外，还对磨齿后工件的齿面误差进行了理论分析；并在理论基础上编制了相应的计算机程序，自动生成接触线族及啮合界限线，对不同参数条件下的啮合情况进行分析，可以使工艺条件达到最佳状态；最后研究了磨齿装置，设计了磨齿机的传动系统。