calcination造句

• The effects of calcinations temperature and holding time on the perovskite phase of synthesized pmn - pt have been studied
  并研究了煅烧温度及保温时间对合成材料单相性的影响。
• Today rce is market leader in the supply of these furnaces for the calcination of raw materials used for refractory applications
  是提供这些耐火材料应用中煅烧原料的窑炉的市场领先者。
• Organic soil conditioners and organic material for soil improvement . determination of total organic matter . calcination method
  土壤改良用有机土壤改良剂和有机物质.总有机物质的测定.煅烧法
• Based on the design of the high temperature shaft kiln , for the calcination of limestone , dolomite and magnesite
  ，用于石灰石白云石和菱镁矿的煅烧。这种低成本的窑型是对生产的石灰或白云石中要求
• The f and n came from the precursor solution and the amount of f decreased with increasing calcination temperature
  其中f和n元素来源于前驱体溶液，且tio _ 2薄膜中的f元素含量随热处理温度的升高而减少。
• Polyolefin pipes and fittings - determination of carbon black content by calcination and pyrolysis - test method and basic specification
  聚烯烃管和管接头.用焙烧和热解测定炭黑含量.试验方法和基本规范
• Oven drying only gets powders with 100 - 200 nm . the effect of calcination precess on the ultrafine of the alumina powder has been studied
  研究了煅烧条件对al _ 2o _ 3粉体性能及其矿物相的影响，发现1100下保温1 . 5h为最佳的煅烧条件。
• The results show that high - temperature calcinations , alkaline leaching and stirring scrubbing can ' t separate the current collectors and active materials effectively
  研究结果表明焙烧法、碱浸法和搅拌擦洗法都不能达到活性物质与集流体的有效分离。
• Textile glass reinforced plastics - prepregs , moulding compounds and laminates - determination of the textile - glass and mineral - filler content - calcination method
  玻璃纤维增强塑料.预浸料坯模塑料及层压板.玻璃纤维和矿物填充料含量的测定.煅烧法
• The effects of doping ratio , calcinations temperature and calcinations time on the structure and the particle size have been comprehensively studied
  系统研究了掺杂比，热处理温度，热处理时间等制备工艺过程对ato纳米粉体相组成和粉体粒度的影响。
• The reaction activity of the catalyst can be adjusted by changing the preparing condition , which including the calcination temperature , the metal load and the carrier
  制备过程中焙烧温度、负载量以及不同催化剂载体的选用都会影响所得催化剂的性能。
• Furthermore , we try to fabricate complex perovskite structure pmn - pt by the conventional mixed oxide , liquid phase inclosure technique and microwave calcinations method
  同时也对直接固相合成法、液相包裹体法及微波合成工艺进行了相应的比较和探讨。
• The effect of proportions of raw material , time and temperature of calcinations , and additives on the quality of product was researched using orthogonal test method
  采用正交实验的方法研究了原料配比、 ?烧时间、 ?烧温度、添加剂等因素对产品质量的影响。
• The results show that the product of good quality can be obtained when the calcination time is about 40 min at 700 to 800 with a certain amount of additives
  实验结果表明，在700 800时，加适量添加剂?烧40分钟左右可以得到质量较好的氧化铁红产品。
• Textile - glass - reinforced plastics - prepregs , moulding compounds and laminates - determination of the textile - glass and mineral - filler content - calcination methods
  纺织玻璃纤维增强塑料.聚酯胶片,模制混合物和叠层材料.纺织玻璃纤维和矿物添充物含量的测定.煅烧法
• Textile - glass - reinforced plastics - prepregs , moulding compounds and laminates - determination of the textile - glass and mineral - filler content ; calcination methods iso 1172 : 1996 ; german version en iso 1172 : 1998
  纺织玻璃纤维增强塑料.预浸料坯,模塑化合物及叠层板
• Textile - glass - reinforced plastics . prepregs , moulding compounds and laminates . determination of the textile - glass and mineral - filler content . calcination methods
  纺织物玻璃纤维增强式塑料制品聚酯胶片模制化合物及层压板材.纺织物玻璃纤维和矿物填充料含量的测定.煅烧法
• Differential scanning calorimetry ( dsc ) was applied to explore the calcinations parameters , including temperature raising and decreasing rate , holing temperature and time
  采用dsc对原料进行了差热分析，确定合适的升温速率、降温速率、保温温度及保温时间等煅烧条件。
• In order to account for the various effects of active reduction water in a theoretical way we have consistently pursued various calcination methods for special mineral ores
  为了研究活性还原水的诸多效果的原理，我们一贯追求特殊矿石的烧成方法，终于成功达到前所未有的诸多效果。
• The results showed that sequence and way of feeding , reaction temperature , time of aging , stirring speed and drying and calcinations had remarkable influence on the pore structure
  结果表明，加料顺序、加料方式、成胶温度、老化时间、搅拌速率以及干燥焙烧等因素对孔结构均有明显影响。