压制过程的英文

• compacting process
• pressing process

• 压制:    suppress; stifle; inhibit; r ...
• 过程:    process; procedure; transver ...
• 调制过程:    curing process; modulated process; modulation process
• 定制过程:    customization procedure
• 复制过程:    process of the duplication; reproduction process

例句与用法

1. It has shown that the combination with higher magnetic and mechanic properties of the bonded magnet is presented on the basis of proper curing process temperature , 120 cto 150 c , and the curing agent is and proper mold press , 500 - 600mpa , keeping press time is 20 seconds
   固化工艺中的固化温度不宜过低，应以120到150之间为宜。在压制过程中，模压压力为500 600mpa ，保压时间为20秒时可以使粘结磁体的密度达到最高值，且具有较好的磁性能和力学性能。
2. Based on pressing practical experience of eha4120 double - faced clad plate elliptical head , the type head external surface clad layer crack reason during pressing process were analyzed and discussed , and the head pressing task was fulfilled successfully through improving the pressing procedure
   摘要根据eha4120双面复合板椭圆封头的冲压实际经验，分析探讨了此种封头在压制过程中外表面复合层产生裂纹的原因，通过改进压制工艺，成功地完成了封头的压制任务。
3. On the base of analyzing the development of control system for synthetic rubber press internationally , and combining the development status quo of applied research of reliability engineering of hydraulic systems , to overcome the design limitations of traditional control system for synthetic rubber press and such faults as high energy - consume , long process period and low reliability in the pressing process of synthetic rubber in the post - treatment product line , brand - new design and reliability research are to be carried out for the new control system
   通过对目前国内外合成橡胶压块机控制系统发展水平的分析，结合可靠性工程在液压系统中应用研究的发展现状，针对国内合成橡胶后处理生产线上传统橡胶压块机控制系统的设计缺陷及橡胶压制过程中能耗高、工艺周期长、可靠性差等故障现象，对橡胶压块机控制系统进行全新设计和可靠性研究。
4. Engages in processing by first obtaining drawings or cad data from the customer , using this data to produce machining data , and then manufacturing the completed products through machining , manual processing , painting , etc . through cast molding , we have succeeded in achieving a remarkable reduction in the number of air bubbles generated at the time of forming , thanks to the use of our own original in - house developed equipment
   35年经典模型制作历程我们在加工时可根据顾客的图纸或cad资料事先准备加工所需资料，再通过机械加工，手工，涂装等一系列工序完成制作。采用公司独自研发的注型设备，大大减少了压制过程中产生的气泡。