沉降速度的英文

dro ing velocity

fall rate

fall velocity

falling-velocity

+更多解释...

gravity speed

rate of settlement

rate of settling

rate of sinking

sedimentation rate

sedimentation velocity

setting velocity

settling rate

settling speed

settling velocity

settlingrate

sinking velocity

subsiding velocity

• 沉降:    subside; settle
• 速度:    velocity; speed; b ...
• 沉降速度秤:    sedimentation bala ...

例句与用法

更多例句：  上一页    下一页

1. The indoor experiments and field investigation are applied to find the settlement speed of high earth fill subgrade . the steadiness of high earth fill sub - grade is discussed with random finite element data analysis method
   本课题拟通过设定的室内试验及对室外试验路段的观测来寻求高填方路基的沉降速度，并作了随机有限元数值分析，对高填方路基的稳定性方面作一定探索。
2. With the increasing initial orientation angle and length - width ratio , the drifting distance , the fluctuation of the orientation angle , lateral drifting velocity and rotation velocity all increase , while the final settling velocity decreases with the increasing length - width ratio
   初始取向角和长宽比增大，则粒子的横向漂移以及取向角、侧向漂移速度和转动角速度的振荡幅度都增大；同时随着长宽比的增大，粒子的沉降速度相应减小。
3. In this paper , wastewater is looked on as solid - liquid two - phase flow . firstly , the sedimentation of the particles in fluid was analyzed , and some equations was induced under different flow conditions . this set a base for the velocity in the next chapters
   本文将污水视为固液两相流,首先对颗粒在流体中的沉降理论进行了分析,从中得出沉降速度在不同流动状态下的表达式,为后面分析颗粒的起动、扬动、止动流速与管道运行临界不淤流速打下了一定的基础。
4. In the process of single fiber sedimentation , it is steady that the fiber axis orients horizontally . the terminal sedimentation rate and the lateral shifting rate increase with the particle aspect ratio . the fiber with the aspect ratio of about 2 . 8 rotates fastest to the stable location
   对于单根纤维的沉降，其稳定取向是轴线与重力方向垂直的方向；纤维的沉降速度随长径比的增加而增加，但趋势变缓；纤维的横向漂移随长径比增加而增加；长径比在3左右的纤维，旋转到稳定取向的速度最快。
5. Aim at the shortage in actual application that the frp pipe flange joint with the steel pipe and steel parts , in consideration of the special advantage of the adhesive boned joint , put forward the method that the steel flange adhesive boned steel pipe or steel part after the steel flange instead the frp pipe flange , or the frp pipe adhesive boned direct with the steel and steel part , it can reduce the stress concentration problem that cause from the different of the descend speed and the hot bulge or freeze coefficient in the applied process . thus reduce the damage number and the maintenance costs of the piping , so this method can have the greatly actual application value
   针对玻璃钢管道与钢管及钢管件之间法兰连接方式在实际应用中的不足之处,考虑到胶接连接的独特优势,提出如用钢法兰代替玻璃钢法兰与玻璃钢管道胶接后,再与配套的钢管及钢管件进行连接,或玻璃钢管道直接与钢管(件)进行胶接连接,则可减少玻璃钢管道在应用过程中与钢管(件)连接后因沉降速度及冻胀系数均不同而产生的应力集中问题,减少管道的损坏次数及维护成本,有很大的实际应用价值。