Several light strokes will transfer much of the paint to the surface to be coated 轻刷在涂装表面产生细纹,随即扩散为覆盖底材均一涂膜。
Blisters are not acceptable . improper adhesion which exposes bare metal is not acceptable 砂眼不可以接受.暴露金属底材的电镀附著不可接受
Do not apply when the surface temperature is less than 3 above the dew point of the air 底材表面温度应比空气露点至少高3 ,否则不能施工。
Blisters and other signs of improper adhesion , which expose bare metal , are not acceptable 汽泡及因不适当的粘贴而引起的金属底材暴露是不可以接受的
See notes of " runs and sags ” . use a smaller nozzle . hold the gun at right angles to the surface 参见“流挂”一栏。或采用小一点的喷嘴。使喷枪与底材角度正确。
Apply on properly prepared steel , treated galvanised steel / aluminium , or others as recommended 施工于适当处理的钢材、电镀处理的钢材和铝材,或其他推荐底材上。
Do not apply when the surface temperature is less than 5 or less than 3 above the dew point of the air 底材温度不可低于5 ,而且至少应当高于空气露点温度3以上。
Reduce pressure . use a larger nozzle . hold spray gun closer to the surface . spray at right angles to the surface 改变压力。使用大一点的喷嘴。加近喷枪与底材的距离。调整高度。
Painted materials should be dry , without dust , without oil stain , temperature of construction environment should not be low 8 底材必须干燥,无灰尘,无油污,施工环境不得低于8 。
It has good compatibility with a wide range of shop primers and antifouling paints and exhibits excellent adhesion to bare steel 与各种车间底漆配套性良好,与各种防污漆的配套性也很好与裸钢底材的附着力极佳。