In order to avoid the effect of space environment on the cables and their signals , all the cables are laid through the central hole of the modular joint 采用中心孔走线方式实现了关节的内部走线，避免了空间环境对导线及其传输信号的影响。
Effects of grain boundaries on the resistivity , capacitance of copper wires and the fuzzy degree of signal transmission have been studied in the present paper 摘要通过分析晶界对铜线材电阻率、电容值以及信号失真度的影响规律，研究晶界对线材传输信号影响的机制。
The design process emphases on the managing of the scrambled signal , which involves the channel processing , the demux , and the descramble of the signal 设计过程主要以对加密的码流信号的处理作为重点。包括传输信号的信道处理、码流的解多工复用、以及加密信号的解密等。
One of the major drawbacks of ofdm system is that the ofdm signal of the transmitter can have high peak - to - average power ratio ( papr ) , which limits ofdm ’ s wide applications 但是ofdm系统的一个主要缺点就是发送端的传输信号具有较大的峰值平均功率比( papr ) ,这限制了ofdm技术的广泛应用。
With unbalanced interconnects , the fact that the shield carries signal current means that it cannot be truly " grounded " at both ends or there would , de facto , be no way for signal current to exist 非平衡的方式中，屏蔽线也用于传输信号，这意味着连接两端都不可能真正地接地，事实上，信号电流也许就不存在。
The signal is modulated and demodulated when it is transmitted . we take some measures such as anti - jamming and rejection of attenuation to make sure of reliability of communication 由于采集点较为分散，距离较远，在信号传输时，我们传输信号进行调制解调，并增加了抗干扰、抗衰减措施保证通讯系统的可靠性。
When signals are transferred noise will disturb them . how to reduce the disturbance is an important thing during the process of communication . using filter to reduce disturb is a good way to make it 另外文章还关注了传输信号过程中噪声与干扰的处理和减弱，对如何选用滤波器来实现信号的去噪做了一定的分析。
Separate signal and return lines for each signal circuit reduces the problem , and using a cable with twisted pairs for each signal circuit is even bettor ( but more expensive and often unnecessary ) 给不同信号分配独立的信号线和返回线可以抑制互感，用双绞线传输信号效果尤佳（但这样做会增加成本，而且通常没有必要） 。
If the message is encoded into the total intensity , the transmission method that works quite well in single - mode laser system cannot be extended directly to the multi - mode laser system due to the delay effect of the transmitted message 当把信号叠加在总强度上时，由于信号有延迟效应，所以用原来在单模激光之间传输信号的成功办法就出现了问题。
We found that the energy consumption of nodes varies with wireless transferring radius , which were not put into consideration during the existed energy - save and energy - aware route protocols in wsn 本文发现节点能量的消耗与无线传输信号的发射半径之间有着紧密的关系,而现存的协议中尚未发现有针对节点自身能量进行无线传输半径动态调整来达到节能目的的网络路由协议。
