With optical microscope , friction and wear spectrometer and scratch spectrometer , the influence of the parameters of sputtering time , sputtering power and interface layer on the film was studied 借助光学显微镜、摩擦磨损试验仪和划痕试验仪等研究了溅射时间、溅射功率以及中间层对薄膜性能的影响。
Physical model and research development of scratch test are reviewed in this paper . the physical relationship between critical load lc measured by scratch test , shear strength and adhesion energy exists . the critical load lc can be used to characterize adhesion strength of hard coating 本文总结了划痕试验法的物理模型及研究现状,临界载荷与涂层和基体之间的界面剪切强度和附着功有物理关系,临界载荷能够表征涂层与基体的结合力。
Abstract : physical model and research development of scratch test are reviewed in this paper . the physical relationship between critical load lc measured by scratch test , shear strength and adhesion energy exists . the critical load lc can be used to characterize adhesion strength of hard coating 文摘:本文总结了划痕试验法的物理模型及研究现状,临界载荷与涂层和基体之间的界面剪切强度和附着功有物理关系,临界载荷能够表征涂层与基体的结合力。
The pretreatment , effect of bath compositions and operation conditions such as temperature , currenty and time on compactness of the zinc and cu / ni / cr coatings have been investigated . the relationship of operation conditions to thickness of the coatings was studied by weight method . the specimens have been pickled in nacl or sulfate acid solution to evaluate the porosity of the coating 研究了镁合金电镀前处理工艺,电镀锌、电镀铜/镍/铬工艺配方及其施镀温度、电流密度和时间对镀层致密性的影响;采用称重法研究施镀工艺与镀层厚度的关系,利用nacl溶液和硫酸溶液浸泡试样来考察镀层孔隙率,采用划痕试验和热震试验检验镀层的结合力,采用金相显微镜和扫描电子显微镜观察镀层表面形貌。
The structure and the thickness of the coatings was inspected by the xjp - 2 metallography microscope , the structure morphology was tested by philips xl30 peg sem , and the adhesion between the foundation and the coating was examed by two methods : one is ws - 92 sound - producing coating adhesion nick testing , another is bending 利用xjp - 2型金相显微镜观察镀层组织并测其厚度, philipsxl30feg型扫描电镜观测镀层表面的组织形貌,镀层与基体的结合力采用ws - 92型声发涂层附着力划痕试验和弯折法两种方法来定性地检测。