Q : what should we do if there s scratch on the lcd ? a please contact the distributor to determine the responsibility 问：液晶显示器lcd在萤幕上出现刮痕现象，应如何处理？
Testing methods for paints - part 5 : mechanical property of film - section 4 : scratch hardness pencil method erratum 1 涂料的试验方法.第5部分:涂层膜的机械特性.第4节:刮痕硬度
Do not haul the putter on the green and pay attention to run - up footstep in process in case scratch green and affect others putting 勿将推杆于果岭上拖行，并注意行进间应将脚步抬高，以免造成刮痕，影响他人推杆。
Nubuck ? a hide with suede - like finish ; leaves marks even after a soft touch of fingers or other objects ; marks are removable by brushing 牛巴哥类似反毛皮外观的皮革，表面容易留下刮痕，即使用手指或其他物品轻柔抚摸也不能除去，但可用毛刷刷去。
Is easy to install the cost to be low has the fine pliability and anti - scratches the ability , may use many kinds of must excavates the way , the enormous place has then executed 易安装成本低具有优良的可挠性及抗刮痕能力，可采用多种非开挖方式，极大地方便了施
This is a new generation of coating in which contains multi - layer structure and nano - scale nitride providing a super - hard surface to resist wearing and scratching 此崭新的涂层结合纳米氮化物及多层膜技术，能提供超高表面硬度而减低磨损及刮痕情况，非常适合在刀具上应用。
Buffer swirl , also referred to as holograms , are circular scratches grooved into the finish through either the improper use of a rotary buffer , or using the wrong pads and chemicals with the rotary buffer 机器刮痕，或者不规则的划痕，圆形的抓伤等都是由于使用轨道式抛光机操作不正确造成的或使用错误的抛光盘和产品造成的。
Smooth and scratchproof face : advanced european and american production technology and recipes is introduced for this product , thus the turned - out board material is of smooth face and high hardness , collision and impacting will not result in depressions and scratches 本产品引进欧美先进生产工艺及配方，生产出来的板材，表面平整且硬度高，不因碰撞面产生凹陷和刮痕。
Shallow swirls can be removed using light swirl removers such as scratchx or # 9 swirl remover 2 . 0 both of these products will safely remove light swirls and scratches from your finish without using harsh chemicals or sharp abrasives 使用轻度刮痕清除剂可以去除浅的刮痕，像车身划痕纲纹清除剂或# 9刮痕清除剂2 . 0 ，都可以安全去除刮伤，不要使用刺激性的或强研磨性的产品。
According to the experimental results , the critical loads are higher as more nitrogen containing ; however , the critical load of the film of 66 percent nitrogen containing is very low because of much graphitizing 由实验结果可得知，当类钻碳薄膜的氮含量提高时，其刮痕试验得到的临界负荷值会变大，但是当氮含量达到66 %时，因为类钻碳膜已有石墨化的现象，临界负荷值则会急据的下降。
