载荷

• It is measured at a speed of 2m/s under load intensity of 1. 96mpa .
  它是在载荷集度为196Mpa和速度为2ms时测得的。
• Cracks may initiate in compression, and certainly in tension .
  裂缝可能在压缩载荷下形成，当然也可能在拉伸载荷下形成。
• That is, the load is dropped off in the proportion to the crack length .
  这就是说，载荷随裂纹长度的增加而按比例地下降。
• Sedimentary loading with consequent thermal blanketing will become major factors .
  随着热熄灭作用以后，沉积载荷将变成主要因素。
• Moment loads, such as those described in fig. 23, frequently occur in machine parts .
  象图23中所示的那种力矩载荷经常在机械零件中出现。
• The basic stress-strain relations are defined with respect to an axially loaded member .
  基本的应力-应变关系是用承受轴向载荷的构件确定的。
• The body must return identically to its original condition when the loads are released .
  当去掉载荷时，物体必须恢复到与原来完全一样的状态。
• The resultant effect at any chosen point is the sum of the effect of the various loads .
  在任意指定的部位上，总的作用力是各载荷作用的总和。
• The total belt load of 400 lb is now divided into components, as shown in fig. 3-16(c) .
  现在，将整个400lb皮带载荷分解成分力，如图3-16（c）所示。
• We now imagine that the deviator load is increased sufficiently to produce a slow rupture of the sample .
  现在设想偏载荷增加到足以使试件缓慢破坏。