weld造句
- Arc strikes outside of the welds were avoided .
焊缝外要避免电弧穿刺。 - The parts welded together perfectly .
这些零件完好地焊在一起了。 - The bars were welded to the deck plate .
扁钢焊接在桥面板上。 - These include gusset plates welded to the flange .
这些包括焊接到翼缘上的节点板。 - The box corner welds were made with e70 electrodes .
箱型梁内角部焊缝所用的电焊条为E70。 - All skilled welding and fitting was done by regular employees .
全部技术性的焊接和装配活都由正式工人担任。 - The welding conditions should always be neutral or slightly oxidizing .
焊接气氛必须永远保持中性或微氧化。 - Weld a bunch of untrained recruits into an efficient fighting force .
把未经训练的一群新兵组织成有战斗力的部队。 - All cracks were detected in regions where such manually made weld passes existed .
所以检查到的裂纹都位于有手工焊缝存在的区域。 - Slag, blowholes, and paint on unfused regions were observed at the welded junctions .
在焊接处看到了夹渣,气孔及未熔透区的油漆。 - It's difficult to see weld in a sentence. 用weld造句挺难的
- The observed friction force is the force required to break these tiny welds .
我们观察到的摩擦力,就是破坏这些细微的焊接点所需要的力。 - The specimens were machined such that plug weld was centered on the width of the specimen .
对试件进行了机加工以使塞焊焊缝位于试件宽度中间。 - No spalled paint exists at the plug weld and for a short distance each side of the plug welds .
在塞焊焊缝处及塞焊周围距离内无细漆碎屑存在。 - The crack between the coped and hole was removed by air arc and then repaired by welding .
在修割边和钻孔之间的裂纹用气弧消除,然后进行焊补。 - Cracks have been found in the flange and web splices at groove welds in at least four bridges .
至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。 - This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener .
研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始的。 - Often lack of fusion adjacent to the girder web in the transverse groove welds led to the cracking .
在靠近主梁腹板的横向坡口焊缝处常常出现未熔透而导致裂纹。 - One cause of delay in the development of new steels has been that welds have failed, causing cracking .
阻碍新钢材发展的一个原因是焊接曾遭到失败,产生了裂纹。 - The thermostatic spring is made up of two different metal strips welded together and formed into a spiral .
恒温控制弹簧是以两种金属条缠在一起形成螺旋状的弹簧。 - Hence lack of fusion and slag would exist at the weld root and create a large initial crack condition .
因而未熔透及夹渣存在于焊缝棍部,并造成大的初始裂纹条件。