允许误差的英文

• acceptable variation
• admissible error
• allowable error
• allowable tolerance
• allowance error
• ee error excepted
• ee errors excepted
• error allowance
• errorexcepted
• give or take
• leeway
• permissible error

• "允许"英文翻译    permit; allow; enable; allow ...
• "误差"英文翻译    error
• "允许误差限" 英文翻译 :    allowable limits of error
• "容许误差允许误差" 英文翻译 :    permissible error
• "国际允许误差" 英文翻译 :    it international tolerance
• "色度允许误差" 英文翻译 :    colur tolerance
• "转矩允许误差" 英文翻译 :    torque allowance
• "最大允许误差" 英文翻译 :    maximum permissible error
• "容许误差公差允许误差" 英文翻译 :    permissible error
• "波形参数允许误差" 英文翻译 :    waveform parameter tolerances
• "方向瞄准允许误差" 英文翻译 :    along course aim tolerance
• "高低瞄准允许误差" 英文翻译 :    across course aim tolerance
• "公差,容差限,许,允许误差 容错度" 英文翻译 :    tolerance
• "钱币金属纯度的允许误差" 英文翻译 :    remedy of fineness
• "允许误差；错误不在此限" 英文翻译 :    ee
• "在命中的允许误差范围内" 英文翻译 :    in the bucket
• "容许误差" 英文翻译 :    acceptable error; admi ible crror; admi ible error; admissible error; allowabie deviation; allowable deviation; allowable error; allowableerror; allowance error; allowble error; error allowance; permissible error; tolerable error; tolerated error
• "容许误差限" 英文翻译 :    limit of allowable error
• "限差，容许误差" 英文翻译 :    tolerance
• "安装容许误差" 英文翻译 :    erecting tolerance; erection tolerance
• "故障容许误差" 英文翻译 :    failure tolerance
• "量大容许误差" 英文翻译 :    margin of error
• "容许误差范围" 英文翻译 :    range of allowable error
• "施工容许误差" 英文翻译 :    construction tolerances; constuction fits
• "制导容许误差" 英文翻译 :    guidance tolerance

• Allowable error for judge of quality testing results in feeds
  饲料检测结果判定的允许误差
• This is a qualitative test . tolerance might be 2 - 3 %
  这是一个定性的测试。允许误差在2 - 3 %之间。
• Dimensions , mass and permissible variations of hot rolled steel sections
  热轧型钢的尺寸质量及其允许误差
• It international tolerance
  国际允许误差
• Dimensions , mass and permissible variations of hot rolled steel plates , sheets and strips
  热轧钢板薄板及钢带的尺寸质量及允许误差
• The maximum permissible error when the working frequency of resistor is equal to or lower than the measurement frequency
  电阻箱的工作频率等于或低于测试频率上限时的最大允许误差。
• For shorter test times , appropriate reductions in the tolerances must be defined , e . g . 2 weeks for 3 months
  对于1年以内的测试，必须规定相应缩短的允许误差，例如， 3个月的允许误差为2星期。
• Drawing out the standard of quality control means to combine the sampling and analysis procedures together and draws out the justified limit of the allowed variance
  其中质量控制标准的制定，是把采样和分析测试过程综合进行?虑，制定合理的允许误差限度。
• To contrast with the real clock and find the reason which cause the error and give the arithmetic which can minimize error , then lets the clock meet the need of production
  对比实际的时钟，查找出误差的来源，并作出调整误差的方法，使得误差尽可能地小，使得系统可以达到实际数字钟的允许误差范围内。
• After working for half a year , the measurement system has the high reliability , according to the appraisement , it has far higher precision than maximal err 3 % which is regulated by china for level 1 measurement . the system has satisfied the design requirement
  该计量系统已运行半年多，经局技术监督处鉴定，其计量精度远高于国家规定的天然气一级计量最大允许误差3 ，可靠性强，达到设计要求。

• 允许误差的法语：déviation admissible