压紧力的英文

• compacting force
• packing force
• pressing force

• "压紧"英文翻译    compact; clamp; compress tig ...
• "垫片压紧力" 英文翻译 :    gasket seating stress
• "压紧力生成" 英文翻译 :    aufbringung der anprekraft application of clamload
• "压紧力损失" 英文翻译 :    anprekraftverlust clamload loss
• "有效压紧力" 英文翻译 :    wirkanprekraft
• "压紧力特性曲线" 英文翻译 :    anprekraftkennlinie
• "压紧" 英文翻译 :    compact; clamp; compress tightly
• "夹紧力" 英文翻译 :    chucking effect; clamp force; clamping force
• "扣紧力" 英文翻译 :    tightening force
• "锁紧力" 英文翻译 :    tight locking force
• "销紧力" 英文翻译 :    locking force
• "预紧力" 英文翻译 :    initial tension; predetermincd tension; preliminary tension; preload; pretightening force; pretightening load; pretightening up force
• "张紧力" 英文翻译 :    tension
• "夹紧力矩" 英文翻译 :    clamping torque
• "拉紧力装置" 英文翻译 :    tensioning device
• "密封紧力" 英文翻译 :    sealing load
• "模具夹紧力" 英文翻译 :    die hold-down pressure
• "拧紧力矩" 英文翻译 :    anziehdrehmoment
• "扭紧力矩" 英文翻译 :    t tightening torgue
• "上紧力矩" 英文翻译 :    tightening torque
• "压力自紧力" 英文翻译 :    energized force by pressure
• "周向拧紧力" 英文翻译 :    circumferential makeup
• "轴向预紧力" 英文翻译 :    axialkraftbeaufschlagung axial load application
• "被在…压紧" 英文翻译 :    angedrückt werden
• "将…压紧" 英文翻译 :    compact 2

• To ensure the charging pump working reliably , the following measures should be adopted : ( 1 ) adopting modified circular casing to reduce the radial force of the impeller and decrease the seal clearance ; ( 2 ) using radical ribs on impeller and helical sealing on shaft to realize minor pressure differential ; ( 3 ) using back pressure stuffing box to ensure sealing under small packing force ; ( 4 ) adopting self - lubricant flexible graphite stuffing for absorption of solids entering in the graphite in case of leaking
  为确保灌注泵可靠工作，提出改进措施： ( 1 )采用改型环形泵体降低叶轮的径向力，减小轴封间隙，抑制泄漏； ( 2 )采用背叶片降低叶片根部压头，获得微压，使轴封两端承受较小压差； ( 3 )采用螺旋密封降低轴封两端压差，在保持微压的同时避免出现负压，密封效果更好； ( 4 )采用反压式填料密封结构，在很小的压紧力下，即可保证密封； ( 5 )采用具有润滑功效的柔性石墨填料，即使发生轴封泄漏，进入石墨内部的固相颗粒也将随着石墨的消耗而被钻井液吸收。
• Ultrasonic motors have been used in the joint because of its special working principle . its rotor and stator have been tightly pressed together to generate big self - lock power when out of the electricity . so joint can move to the appointed position and do not need worm wheel and worm
  本关节驱动元件采用超声波电机，因为超声波电机独特的工作原理，定转子之间用较大的压紧力压紧，断电后有很大的自锁力，因此当关节运动到指定位置时不需要蜗轮蜗杆机构就可以实现自锁。

• 压紧力的日语：いたおさえりょく