基体合金的英文

• matrix alloy

• "合金"英文翻译    alloy
• "奥氏体合金" 英文翻译 :    austenitic alloy steel
• "半导体合金" 英文翻译 :    semiconducting alloy; semiconductor alloy
• "超导体合金" 英文翻译 :    superconductor alloy
• "弹性体合金" 英文翻译 :    elastomer alloy
• "固溶体合金" 英文翻译 :    solid solution alloy
• "莱氏体合金" 英文翻译 :    ledeburite alloy
• "铁素体合金" 英文翻译 :    ferrite alloy
• "液体合金" 英文翻译 :    liquid alloy
• "奥氏体合金钢" 英文翻译 :    austenitic alloy steel
• "铁素体合金钢" 英文翻译 :    ferritic alloyed steel
• "铜基合金基体" 英文翻译 :    copper base matrix; copper-base matrix
• "半导体合金公司" 英文翻译 :    semi alloys inc; semi-alloys inc
• "气体合金化处理" 英文翻译 :    gas alloying
• "铁素奥氏体合金" 英文翻译 :    ferritic-austenitic alloy
• "亚可墨磁体合金" 英文翻译 :    alcomax
• "铁素体奥氏体合金钢" 英文翻译 :    ferritic-austenitic alloy steel
• "基体" 英文翻译 :    basal body; basal corpuscle; generatrix; gleba; groundmass; kinetosome; matrix; mer; palasome; substrate; substratum
• "奥氏体合金钢铸件中铁素体含量的估算" 英文翻译 :    standard practice for steel casting austenitic alloy estimating ferrite content thereof
• "弹性体合金一可熔融成型橡胶" 英文翻译 :    ca-mpr elastomer alloy melt processable rubber
• "弹性体合金一热塑性硫化料" 英文翻译 :    ea-tpv elastomer alloy thermoplastic vulcanizate
• "高温用无缝铁素体合金钢管" 英文翻译 :    standard specification for seamless ferritic alloy-steel pipe for high-temperature service
• "接体合" 英文翻译 :    acceptor bond
• "氨基体" 英文翻译 :    amidomyelin
• "瓷基体" 英文翻译 :    porcelain basal bodies; porcelain basal body

• A better strengthening effect on am50 by adding re has a relation to the content of zn in the matrix alloy
  稀土对am50合金力学性能改善的效果硕士学位论文要比azgl好，这与基体合金中zn的含量有关。
• The hardness of the parts made of composits was higher than that of the parts made of the matrix alloys . but the hardness of both kinds was higher than their ingots respectively
  复合材料压铸件的布氏硬度比基体合金压铸件的布氏硬度高，两类压铸件的布氏硬度分别高于相应铸锭的布氏硬度。
• The results showed that sic particles dispersed uniformly in the composites , that the composites " hardness increased with the increasing volume fraction of sic particles , and that the composites had the outstanding wear resistance properties that were superior to the matrix alloy
  结果表明， sic颗粒在复合材料中分布均匀；复合材料的硬度随sic颗粒体积含量的增加而增加，且比基体合金的硬度高； sic颗粒增强铝基复合材料具有优良的耐磨性能，且优于基体合金。
• Because of its excellent properties , such as high strength , high module , wear resisting , and etc . , sicp was added to ferroalloy as a reinforce phase . but the intrinsic difference between the bonds led to poor fabrication of the composites . in this paper , the effects of alloying , sintering , and heat - treatment on the properties and microstructures of sicp / ferroalloy - based composites were studied , : it was found that sic particles reacted with ferroalloy when sintered in 1100
  碳化硅因其高强度、高模量、耐热、耐磨等优良性能而被作为颗粒增强体来制备铁基复合材料，但因其共价键与铁基体的金属键之间的本质区别导致两者复合困难，本文拟从基体合金化、烧结及热处理工艺等方面对铁合金基复合材料组织与性能的影响进行考察，具体内容如下：加入fe - cu - c基体中的sicp颗粒， 1100烧结时就已经开始发生分解，但反应不强烈，在颗粒表面镀镍可以延缓基颗粒与基体之间的反应。
• The results of the hardness test showed the composites " hardness increased with the increasing volume fraction of sic particles . results of the wear tests showed the composites had the outstanding wear resistance properties , especially in lubricated sliding case , the wear resistance properties of the composites were superior to the matrix alloy over one or two orders of magnitude
  结果表明，复合材料铸锭中， sic颗粒分布均匀；材料的硬度随sic颗粒体积含量的增加而增加； sic颗粒增强铝基复合材料具有优良的耐磨性能，在油润滑条件下，复合材料的耐磨性能比基体合金高一至两个数量级。