基体金属的英文

• matrix metal
• parent metal
• principal metal

• "金属"英文翻译    metals genus
• "基体金属热电偶" 英文翻译 :    base-metal thermocouple
• "焊接基体金属的处理" 英文翻译 :    preparation of base metal for welding
• "焊接基体金属的熔化" 英文翻译 :    parent metal fusion
• "未受热影响的基体金属" 英文翻译 :    unaffected base metal; unaffected zone
• "本体金属" 英文翻译 :    parent metal
• "单晶体金属" 英文翻译 :    single crystalline metal
• "多晶体金属" 英文翻译 :    polycrystalline metal
• "非晶体金属" 英文翻译 :    amomet; amorphous metal
• "固体金属" 英文翻译 :    solid metal
• "胶体金属" 英文翻译 :    colloidal metal
• "晶体金属" 英文翻译 :    crystalline metal
• "母体金属" 英文翻译 :    base metal; basemetal; parent metal
• "液体金属" 英文翻译 :    liquid metal
• "载体金属" 英文翻译 :    carrier metal
• "整体金属型" 英文翻译 :    one-piece die
• "本体金属,卑金属" 英文翻译 :    base metal
• "金属基体" 英文翻译 :    groundmass; metal base; metallic matrix
• "本体金属,母材(电焊)" 英文翻译 :    parent metal
• "本体金属试件" 英文翻译 :    base metal test specimen
• "刚体金属导管" 英文翻译 :    rigid metal conduit
• "固体金属波导" 英文翻译 :    solid metal guide
• "焊接母体金属" 英文翻译 :    welding base metal; weldingbasemetal
• "母材母体金属" 英文翻译 :    mother-plate
• "母体金属裂纹" 英文翻译 :    base metal cracking

• If weakness exists in the bond between the plate and the basic metal, blisters may also develop here .
  如果化镀层和基体金属之间的键合有弱点存在，起泡也会在该处生成。
• Non - conductive coatings on non - magnetic basis metals - measurement of coating thickness - eddy current
  非磁性基体金属上非导电覆盖层覆盖层厚度测量涡流法
• Non - conductive coatings on non - magnetic electrically conductive basis materials - measurement of coating thickness - amplitude - sensitive eddy current method
  非磁性电导基体金属上的非导体镀层.镀层厚度的测量.波幅灵敏涡流法
• And then electroplate nickel - sealing with solid particulate , which is to make micro - crack chromium when electroplating chromium again , this can avoid unsmoothness , and slower corrosion speed , as a result , improve defence performanc e
  再镀一层含有固体微粒的镍封，令到再镀铬时形成微孔铬，从而防止产生大而深的直贯基体金属的少量腐蚀沟纹和凹坑，向横向发展，减缓了穿透基体的腐蚀速度，进一步提高了防护性能。
• But the basic theories producing porous metals in high temperature were not yet fully understood , especially the foaming mechanism , foaming thermo - dynamics study on nucleation , growth , movement and disappearance of gas pore were rarely researched
  但是对于发泡过程基础理论研究还不够全面，特别是气孔的发泡机制即气孔在基体金属内随外界条件变化而发生的形核、生长、运动和消亡等热、动力学条件的研究很少。
• Two kinds of thermal residual stresses exist in metal matrix composites ( mmc ) . one of them is temperature gradient induced thermal stresses caused by temperature gradient in mmc . the other can develop upon cooling from the processing temperature to room temperature due to the coefficient of thermal expasion ( cte ) mismatch between the fiber and matrix and is called cte mismatch induced thermal stresses
  金属基复合材料( mmc )有两种形式的热应力，一种是在mmc中由于温度梯度引起的热应力，即温度梯度诱导的热应力；另一种是在冷却过程中由于基体金属和纤维的热膨胀系数不匹配引起的热应力，即热膨胀系数不匹配诱导的热应力。
• The liquid infiltration - extrusion technology , as a new forming method which includes the liquid forging and the solid extrusion , has been developed in recent years . the process in essence is that after liquid metal is infiltrated into the fiber perform under pressure , high pressure is directly applied to it so that the melted metal is to be crystallized and solidified under pressure , and then undergoes large plastic deformation at the liquid - solid state or the state just solidified
  液态浸渗挤压是近年来发展起来的一种融液态模锻和固态挤压为一体的新成形工艺，其工艺实质是使液态基体金属在压力下渗入纤维预制体中，发生压力下结晶凝固，并在液-固态或刚凝固态经受大的挤压塑性变形，一次成形出金属基复合材料的型材类制件。

• 基体金属的日语：ぼざい きじきんぞく じがね