干态的英文

• dry state; dry

• "干"英文翻译    trunk; main part
• "态"英文翻译    form; condition; appearance
• "热（干态）" 英文翻译 :    dry heat
• "相干态" 英文翻译 :    coherent state
• "对角相干态" 英文翻译 :    diagonal choerent-state
• "干态强度" 英文翻译 :    dry bond strength; dry strength
• "干态硬度" 英文翻译 :    dry hardness
• "相干态表示" 英文翻译 :    coherent representation
• "相位相干态" 英文翻译 :    phase coherent state
• "干态断裂伸长" 英文翻译 :    water-free breaking elongation
• "干态机械强度" 英文翻译 :    dry strength
• "干态干燥剂脱水酌" 英文翻译 :    dry desiccant dehydration
• "未化成干态蓄电池" 英文翻译 :    unformed dry battery
• "干太郎" 英文翻译 :    kantaro; mikitaro
• "干太" 英文翻译 :    kanta; mikita
• "干苔" 英文翻译 :    latticed enteromorpha dried frond
• "干塔卡" 英文翻译 :    guntakai
• "干塔" 英文翻译 :    dry tower

• But the strength of sulfonated sbs membranes was poor and the dry membranes was brittle
  研究也发现，磺化后膜的存在强度不高，干态膜较脆等问题。
• Surgical drapes , gowns and clean air suits for patients , clinical staff and equipment - part 4 : test method for linting in the dry state
  病人医护人员和器械用手术单手术衣和洁净服.第4部分:干态落絮试验方法
• Different from potassium acetate , ammonium acetate intercalated into the inner layer of kaolinite more completely in buffer solution ( ph = 9 ) than under near dry condit ion
  与乙酸钾不同，乙酸铵与高岭土的插层作用在ph = 9的缓冲溶液中，比在近干态下进行的完全。
• It can typecast wet or dry shape sand , improve the cast quality . in a word , it is a fine quality cast sand adhesives , which has the character of dilatability , cohesiveness , floatability . and gel dispersivity , repeated use
  可以浇注湿态和干态型砂，改善铸件质量，并有良好的复用性，是一种优质的膨胀剂，黏合剂，悬浮性和胶体分散性的铸造型砂粘结剂。
• The braking moment of the former under wet condition raises to that under dry condition rapidly for its better microstructure with little water molecule adsorbed in defect , the adaptability to environment is stronger than that of the carbon / carbon composites with smooth lamina
  前者的石墨化度及可石墨化能力均大于后者，由于前者的表面缺陷较少，所吸附的水分子较少，因而在湿态下刹车时，其刹车力矩将很快恢复到正常干态刹车时的力矩水平，对环境的适应能力大于光滑层结构的炭炭刹车副。
• It was showed that sp method was easier than iesp method being used to prepare ms - smips , but sp method did n ' t suitable for high viscosity monomers to be used to prepare ms - smips . the compatibility of fe3o4 particles with monomers and polymers was solved through pre - encapsulation of fe3o4 particles by inverse emulsion in iesp method , the difficulty for sp method to disperse high viscosity monomers to turn into droplets was overcome as well , and precipitation did n ' t occur easily in aqueous recognition system , for the resulting ms - smips had a large quantity of air cores inside , hence had low density themselves . the
  所制备的ms - pigms形态也为较好的球形，湿态时粒子表面具有大量分布较为均匀的孔穴，干态时因粒子收缩表面孔穴闭合；分散剂、引发剂、 fe3o4用量等均对ms - pigms形态有明显的影响；所制备的ms - pigms具有一定的磁响应性，并具有较好的分子识别性能，其对模板的识别主要靠印迹孔穴与模板蛋白质分子因非常近的表面接触而产生的众多氢键的协同作用。