度比的英文

• roundness

• "度"英文翻译    surmise; estimate
• "比"英文翻译    2
• "标度比" 英文翻译 :    division ratio; scale ratio
• "长度比" 英文翻译 :    length breadth ratio
• "尺度比" 英文翻译 :    linear ratio; proportion of principal dimensions
• "粗度比" 英文翻译 :    roughness ratio
• "丰度比" 英文翻译 :    abundance ratio; ratio of abundance; relative abundance
• "幅度比" 英文翻译 :    amplitude ratio; pcnt
• "盖度比" 英文翻译 :    cover ratio
• "刚度比" 英文翻译 :    ratio of rigidity; stiffness ratio
• "拱度比" 英文翻译 :    camber ratio
• "厚度比" 英文翻译 :    thickness ratio
• "弧度比" 英文翻译 :    camber ratio; cambered ratio
• "辉度比" 英文翻译 :    luminance ratio
• "活度比" 英文翻译 :    activity quotient; activity ratio
• "劲度比" 英文翻译 :    stiffness ratio
• "精度比" 英文翻译 :    ratio of precision
• "空度比" 英文翻译 :    reciprocal of duty cycle
• "宽度比" 英文翻译 :    beam ratio
• "粒度比" 英文翻译 :    fineness ratio; size ratio; size scale
• "亮度比" 英文翻译 :    brightness contrast; brightness ratio; luminance ratio
• "流度比" 英文翻译 :    fluidity ratio; mobility ratio
• "密度比" 英文翻译 :    density ratio
• "明度比" 英文翻译 :    brightness ratio
• "浓度比" 英文翻译 :    concentration ratio; concentrationratio

• Trinitro triazidobenzene is less sensitive to impact and friction than mercury fulminate .
  三硝基三叠氮苯的摩擦感度和冲击感度比雷汞低。
• Conical shaft ends for cone taper ratio 1 : 10
  1 : 10锥度比的圆锥形轴端
• More flexible than the same products abroad with best flexibility
  柔软性能优秀，柔软度比国外同类产品好得多。
• Collets for tool holders with taper ratio 1 : 10 - collets , holders , nuts
  锥度比为1 : 10的刀架夹头.夹头刀架和螺母
• Collets for tool holders with taper ratio 1 : 10 . collets , holders , nuts
  1 : 10锥度比的刀具夹持器.夹套夹持器和螺母
• Detection of the corrosion damage in pressure pipeline using strain sensitivity ratio mehod
  压力管道腐蚀灾变检测的应变敏度比法
• Plastics . determination of viscosity ratio of polyamide resins in concentrated solution
  塑料制品.浓缩溶液中聚酰胺树脂的粘度比测定
• The effect on oil displacement efficiency of viscosity of alkaline - surfactant - polymer and polymer flooding solutions
  流度比对化学驱驱油效果影响实验研究
• Roughness comparison specimens - specification for turned , ground , bored , milled , shaped and planed specimens
  表面粗糙度比对试样.第1部分:车磨镗铣成形和刨削试样规范
• A study on relationships between the test - uncertainty - ratio and the risks of the certification result of one measuring instrument
  测量不确定度比和单台仪器检定结论的风险关系研究