径向载荷的英文

• radial load

• "径向"英文翻译    radial; radial direction
• "载荷"英文翻译    load; loading
• "径向载荷分布" 英文翻译 :    radial load distribution
• "径向载荷系数" 英文翻译 :    radial load factor
• "轴承径向载荷" 英文翻译 :    bearing radial load
• "滚动环径向载荷" 英文翻译 :    radial load on the rolling rings
• "变向载荷" 英文翻译 :    reversal load
• "侧向载荷" 英文翻译 :    lateral loading; side load
• "层向载荷" 英文翻译 :    edgewise load
• "法向载荷" 英文翻译 :    normal load
• "反向载荷" 英文翻译 :    reversed load
• "横向载荷" 英文翻译 :    lateral load; transverse loading
• "横向载荷桩" 英文翻译 :    laterally loaded vertical piles
• "拉向载荷" 英文翻译 :    tension loading
• "切向载荷" 英文翻译 :    tangential load
• "竖向载荷" 英文翻译 :    vertical load
• "双轴向载荷" 英文翻译 :    biaxial load
• "弦向载荷" 英文翻译 :    chordwise load
• "压向载荷" 英文翻译 :    compression loading
• "轴向载荷" 英文翻译 :    axial loading; direct-thrust a-frame; thrust load
• "纵向载荷" 英文翻译 :    longitudinal load; thrust load
• "法向载荷因数" 英文翻译 :    normal load factor
• "横向载荷试验" 英文翻译 :    lateral load test
• "横向载荷因数" 英文翻译 :    transverse load factor
• "临界纵向载荷" 英文翻译 :    buckling load

• Radial load on the rolling rings
  滚动环径向载荷
• Radial load factor
  径向载荷系数
• Taper roller bearings are generally used to support combined load mainly consisting of radial load
  详细信息:圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
• When radial load is applied , the active bearing can surpress the displacement of the shaft , thus obtaining an infinite stiffness
  当有径向载荷作用时，自主式轴承能抑制轴颈位移并因此使轴承获得无穷刚度。
• These bearings are featured by the extremely big axial load carrying capacity and mean while they can also carry cetrain radial load
  轴向载荷能力非常大，在承受轴向载荷的同时还可以彻骨你受干径向载荷。
• The product of working speed and radial load should not excess the limited value on the list , which determins the limit of application
  工作中实际转速和径向载荷的乘积不可超过表中极限值,它确定了应用的极限
• Plain bearing block housings are made up of cap , base , aluminum bronze bushing and installing bolts , which mainly bear radial load
  滑动轴承座由上盖、底座、剖分轴瓦（铝青铜） ，安装螺栓组成，主要承受径向载荷。
• Four row circular cone roller bearings its performance and double row circular cone roller bearings basic same , but may withstand the bigger radial direction load and the two axle to the load
  四列圆锥滚子轴承其性能与双列圆锥滚子轴承基本相同，但可承受更大的径向载荷和双轴向载荷。
• With carbureted high - strength good - quality alloy , the series has the feature of high - efficiency and long life - span , high permissible axial and radial loads , low noise , high reliability and compact structure and so on configuration modality
  采用高强度优质合金钢渗碳游淬火，具有高效率高寿命轮及高许用轴向，径向载荷，运行噪音低，可靠性高，结构紧凑等优点。
• Compares with the single row circular cone roller bearings , has may withstand the big radial direction load primarily radial direction load , mainly uses in withstanding the radial direction load primarily diameter , the axial union load function
  与单列圆锥滚子轴承相比，具有可承受较大径向载荷为主的径向负荷，主要用于承受径向负荷为主的径、轴向联合负荷作用。

• 径向载荷的日语：ラジアルロード ラジアルかじゅう ラジアル荷重