循环次数的英文

• cycle index
• cyclical order

• "循环"英文翻译    circulate; circle; round; re ...
• "次数"英文翻译    number of times
• "开裂循环次数" 英文翻译 :    cycle to-crack
• "疲劳循环次数" 英文翻译 :    fatigue life cycle
• "洗舱循环次数" 英文翻译 :    number of cycle of washing
• "应力循环次数" 英文翻译 :    number of cycles of stress
• "重复循环次数" 英文翻译 :    cycle-criterion
• "低循环次数疲劳" 英文翻译 :    low-cycle fatigue
• "累积循环次数比" 英文翻译 :    cumulative cycle ratio
• "每分钟循环次数" 英文翻译 :    cpm; cycles per minute
• "破坏前的循环次数" 英文翻译 :    number of cycles before fractures
• "循环次数计数器" 英文翻译 :    cycle index counter
• "应力循环次数曲线" 英文翻译 :    stress number curve
• "应力循环次数图" 英文翻译 :    s-n diagram
• "蒸汽养护循环次数" 英文翻译 :    steam curing cycle
• "达到破坏的循环次数" 英文翻译 :    cycle life
• "混凝土冻融循环次数" 英文翻译 :    freezing thawnumber of concrete
• "开始断裂的循环次数" 英文翻译 :    cycle of initiating crack
• "疲劳断裂的循环次数" 英文翻译 :    cycles to failure
• "循环次序" 英文翻译 :    circular order; cycle order; cyclic order; cyclical (sequence)
• "循环次分程转换器" 英文翻译 :    recursive-subranging converter; recursivesubranging converterr
• "循环总次数" 英文翻译 :    cycle criterion
• "循环执行次数计数器" 英文翻译 :    cycle index counter
• "次数" 英文翻译 :    number of times; frequency 次数不多 not very often; 练习的次数越多, 熟练的程度越高。 the more you practise, the more skilful you'll become
• "环次联氨基" 英文翻译 :    hydrazi

• In our flow chart(fig. 71)we use n to count the loops .
  在图71的程序框图中，我们利用N来统计循环次数。
• The higher the stress the fewer will be the cycles before failure can be expected .
  应力越高，在可以预料的破坏之前循环次数就越少。
• As the number of cycles of reuse of water increases, salt balance becomes increasingly important .
  盐均衡随着水的再利用循环次数的增加而日益变得重要。
• Thus, for any given stress, the number of expected cycles to failure can be found .
  因此，对于任何一个给定的应力，就可以求出发出破坏的预定的循环次数。
• In our flow chart ( fig . 71 ) we use n to count the loops
  在图71的程序框图中，我们利用n来统计循环次数。
• The correction of the method of equivalent cycle number
  非稳定变应力下疲劳强度计算的等效循环次数法的修正
• 4 . specimens ’ fatigue flexural rigidity reduces gradually while cycle time increasing
  4 、随荷载循环次数的增加,试件的刚度逐渐减小。
• For 3d - c / sic composite , the overall tendency of modulus was diminishing with increased cycle number
  3d - c sic弹性模量随着疲劳循环次数的增加总趋势是减小的。
• The influence of coating thickness upon the fatigue strength will decrease along with the increase of cycling times
  涂层厚度对疲劳强度的影响随循环次数的增加而减小。
• That s at least twice for each iteration , and the exact number of iterations through the list will depend how ordered it was to begin with
  。每次循环至少执行两次，遍历列表需要执行的精确循环次数取决于列表最初排序的情况。