标定精度的英文

• accuracy in calibration
• stated accuracy

• "标定"英文翻译    demarcate; calibration; cali ...
• "精度"英文翻译    precision; accuracy; degree ...
• "标定精炼炉" 英文翻译 :    report furnace
• "率定精度" 英文翻译 :    calibration accuracy
• "设定精度" 英文翻译 :    setpoint accuracy
• "稳定精度" 英文翻译 :    stabilization accuracy
• "电压整定精度" 英文翻译 :    accuracy of voltage adjustment
• "航向稳定精度" 英文翻译 :    steady precision of course
• "深度稳定精度" 英文翻译 :    precision of depth steadiness
• "纵倾稳定精度" 英文翻译 :    steady precision of trim
• "标定" 英文翻译 :    demarcate; calibration; calibrating; standardization; pointing 标定边界线 demarcate a boundary by setting up boundary markers; 标定点 aiming; 标定罐 prover tank; 标定基准线 thrust line; 标定焦距 calibrated focal length; 标定界线 marking of boundaries; 标定晶面指数 indexing; 标定频率 spot frequency; 标定曲线 rating curve; 标定数据 rating data; nominal data; 标定太阳能电池 calibrated solar cell; 标定图 orientation map; 标定误差 calibrated error; 标定指数 indexing
• "精度" 英文翻译 :    precision; accuracy; degree of accuracy; precision accuracy; trueness 高精度 high precision; 精度表 accuracy table; 精度等级 accuracy class; class of accuracy; grade of accuracy; grade of precision; precision class; 精度准则 accuracy criteria
• "整定精确性" 英文翻译 :    setting accuracy
• "特定精原细胞" 英文翻译 :    definitive spermatogonia
• "标定表" 英文翻译 :    calibration scale
• "标定锤" 英文翻译 :    staking hammer
• "标定的" 英文翻译 :    gauged; nominal
• "标定点" 英文翻译 :    aiming point; fixed point; gauge point; gaugepoint; index point; plot point
• "标定法" 英文翻译 :    standardization
• "标定罐" 英文翻译 :    calibration tank; proving tank; tank prover
• "标定器" 英文翻译 :    designator
• "标定球" 英文翻译 :    spherical displacer
• "标定区" 英文翻译 :    calibration area
• "标定树" 英文翻译 :    labelled tree
• "标定图" 英文翻译 :    labelled graph; orientation map

• Computer simulation result shows that the error is mostly less than 0 . 1 , if using this method to calibrate against the angular displacement for airplane ’ s rudders
  最后,进行了误差分析和计算机仿真,结果表明,采用本方案标定精度可达0 . 1 。
• This method can calibrate all parameters at one time , the experimental results show that the satisfactory calibration precision can be achieved by using this method
  该方法一次即可完成所有参数的标定，实验结果表明，此方法能够得到满意的标定精度。
• In order to improve calibration precision without increasing computation complexity , tsai ' s two - stage calibration technique with calibration points in multiple planes is refined
  为了进一步提高标定精度,对利用多平面标定点的tsai的两步法进行了改进。
• The results of experiment shows that this correction method is robust and accurate , which can satisfy the need of the orientation of the vision system of mobile robot
  实验表明该方法可以获得较高的摄像机标定精度，足以满足移动机器人视觉定位精度的要求。
• At the same time , image distortion is corrected by polynomial to handle expediently and the method of selecting reference points and the factor of influencing precision is discussed
  为了提高测量的易用性，标定过程中采用多项式来校正图像的畸变，并讨论了控制点的选取方法和影响标定精度的因素。
• Simulation results on a laser processing robot show that this method can achieve the same calibration accuracy as that of the other traditional calibration approach such as geometrical parameter calibration
  对某激光加工机器人的仿真结果表明，该方法可以达到其它标定法如几何参数标定法所能达到的标定精度。
• 6 . the new concept of digital calibration for intelligent sensor is presented , and programs for computer aided calibration and debugging are designed . with the help of these programs , the calibration of sensor is made visual , simple and more accurate
  提出了传感器的数字化标定概念，设计了应用计算机对智能位移传感器系统进行辅助标定和辅助调试程序，使标定效果可视化，简化了标定过程，提高了标定精度。
• In position - based control , features are extracted from image and used in conjunction with a geometric model of the target and the know camera model to estimate the pose of the target with respect to the camera . the primary disadvantage of position - based control is that it is often highly calibration dependent
  基于位置的控制方式根据已知的目标几何模型和摄像机模型来估计目标相对于摄像机的位姿，其主要缺陷在于控制精度依赖于摄像机的标定精度，而标定精度又受环境的制约。