进刀量的英文

• amount of feed

• "进刀"英文翻译    feed; advancement; advance o ...
• "量"英文翻译    measure capacity
• "单位进刀量" 英文翻译 :    unit feed
• "小进刀量" 英文翻译 :    fine feed
• "横进刀量种数" 英文翻译 :    number of cross feeds
• "纵横向进刀量种数" 英文翻译 :    number of both longitudinal and cross feeds
• "纵向进刀量范围" 英文翻译 :    range of longitudinal feeds
• "进刀" 英文翻译 :    [机械工程] feed; advancement; advance of tool; cutting feed◇进刀角(旋切) knife angle; 进刀量 depth of cut
• "吃刀量" 英文翻译 :    bite
• "每齿走刀量" 英文翻译 :    feed per tooth
• "每转走刀量" 英文翻译 :    feed per revolution
• "粗进刀" 英文翻译 :    coarse feed
• "大进刀" 英文翻译 :    roughing feed
• "横进刀" 英文翻译 :    cross feed; traverse feed
• "进刀槽" 英文翻译 :    feed chute
• "进刀点" 英文翻译 :    engage point
• "进刀角" 英文翻译 :    angle of feed
• "进刀力" 英文翻译 :    feed force
• "进刀箱" 英文翻译 :    feed box; feed change; feed tank; feed-tank
• "慢进刀" 英文翻译 :    jog
• "强进刀" 英文翻译 :    heavy feed
• "切进刀" 英文翻译 :    cutting-in tool
• "细进刀" 英文翻译 :    fine feed
• "重进刀" 英文翻译 :    heavy feed
• "纵进刀" 英文翻译 :    length feed; longitudinal feed

• Work piece will not burnt if in - feed of wheel up to 0 . 02mm
  进刀量可大至2条不烧焦。
• Hard grade for the greater in - feed
  进刀量大时用硬的结合度
• In - feed or
  进刀量或
• Resinoid bonded wheel using on those machines which running with the more in feed or bigger grinding pressure
  特别进刀量大且研磨压力大时用树脂法b
• It is especially suited hard to grind workpiece hardness hrc50 to hrc62 . work piece will not burnt if in - feed of wheel up to 0 . 03mm
  特别适合难研削工件硬度hrc50至hrc62 ，进刀量可大至3条不烧焦。
• A grinding surface is consisted of multi pillars lump . because better chips of metal wash away better during grinding process and allow more grinding fluid flow and keep the temperature low for work piece , it is suitable for larger in - feed grinding
  由多片柱型块组合而成为一个研磨面，由于研磨过程排屑性较好，研磨液渗透较多，研磨工件不易发热所以适合大进刀量之研磨。

• 进刀量的日语：とりゅうきりこみふかさ と粒切込み深さ きりこみ