逆止器的英文

• holdback

• "逆"英文翻译    contrary; counter
• "止"英文翻译    stop; cut out
• "器"英文翻译    implement; utensil; ware
• "带式逆止器" 英文翻译 :    belt brake
• "滚柱逆止器" 英文翻译 :    roller brake
• "逆止" 英文翻译 :    back stop
• "逆止阀" 英文翻译 :    backflow barrier; backflowbarrier; backwater gate; clappet valve; cutoff valve; flap trap; non retern valve; nonreturn valve; non-return valve(check valve); reverse checkvalve
• "逆止门" 英文翻译 :    non return flap; non-return flap
• "逆止线" 英文翻译 :    non-return vlv
• "边止器" 英文翻译 :    side stopper
• "舵止器" 英文翻译 :    rudder stopper
• "后止器" 英文翻译 :    tail stopper
• "静止器" 英文翻译 :    the immobilizer
• "门止器" 英文翻译 :    door fixer
• "停止器" 英文翻译 :    arrestment; holdback; stopper
• "限止器" 英文翻译 :    eliminator
• "抑止器" 英文翻译 :    killer; suppresser; suppressor
• "制止器" 英文翻译 :    arrester; detainer; stopper
• "终止器" 英文翻译 :    terminator
• "泵逆止阀" 英文翻译 :    pumcheck valve
• "抽汽逆止阀" 英文翻译 :    extraction check valve extr chk vlv; extraction non-return valve
• "吊门逆止阱" 英文翻译 :    flap trap
• "给水逆止阀" 英文翻译 :    feed-water check valve
• "回水逆止阀" 英文翻译 :    backwater valve
• "回旋逆止阀" 英文翻译 :    swing check valve

• Backstop for belt conveyer
  带式输送机用逆止器
• The geometrical conditions that the backstop can be run in gear have been educed by researching the movement of the components
  研究了在逆止器工作过程中个相关零件的运动规律，并得出逆止器正常工作的几何参数条件。
• This paper put forward a new type backstop that transfer the backstop moment by the meshing components , and completed the design of the backstop
  本文提出了一种新型的由啮合元件传递逆止力矩的啮合式非接触逆止器，并完成了逆止器的设计。
• The paper analyzed the external forces of the backstop , established the dynamics model of the backstop being run , and analyzed the dynamic load of the backstop
  分析了逆止器的受力情况，建立了逆止器工作的动力学模型并对逆止器进行动载荷分析。
• Abstract : a simple , economic and effective treatment method has been put forward in this paper after analysing the phenomenon which the reverser of inclining belt conveyor often happens turning back during working process
  文摘:通过对倾斜式带式输送机在生产中经常出现逆止器翻背现象的分析，提出了简单、经济、有效的处理方案。
• And the paper analyzed the relations between the errors of the components and load distribution among the backstop piece , and put forward a method of translating the errors into a equivalent error . for the occasion of several backstops being used at the same time , the paper put forward a project of uniform load among the backstops
  分析了误差对逆止器内部逆止块的载荷分布的影响，并提出各种误差转化为等效误差的方法；对多个逆止器同时使用的场合，提出了均载方案。
• Characteristics of structure : this machine adopts shaft type speed reducer drive which covers less space and can be conveniently repaired . upper supporting roller adopts clamping type fixu which can be conveniently installed . furthermore , it can well regulate deflection of conveying belt ; holdback is set for speed reducer with reliable performance to prevent back - slippign of the glusive belt ; dumper has three types : pneumatically actuated , electric and manual ; course of direction - change roller of the rail has three types : 300 , 500 and 800
  2结构特点：该机采用轴装式减速器驱动，占用空间尺寸小，安装维修方便上托辊采用夹紧式固定，安装方便调整输送带跑偏能力强，减速器内设逆止器，防止胶带倒滑的性能可靠卸料器有气动电动和手动三种驱动型式尾部改向滚筒张紧行程有300 500 800三种，用户可接输送距离的1100选取。