镜面光洁度的英文

• mirror finishing
• mirror-finishing

• "镜面"英文翻译    minute surface; mirror face; ...
• "光洁度"英文翻译    finish; fineness; degree of ...
• "抛光到镜面光泽面光洁度" 英文翻译 :    looking-glass finish
• "表面光洁度" 英文翻译 :    cleanliness of surface; surface finish quality; surface finishment; surface roughness; surface smoothness
• "毛面光洁度" 英文翻译 :    frosted finish; satin finish
• "表面光洁度仪" 英文翻译 :    profilograph; profilometer
• "车削面光洁度" 英文翻译 :    turned finish
• "表面光洁度测量仪" 英文翻译 :    surface finish meter; surfagage; talysurf; topograph
• "表面光洁度等级" 英文翻译 :    grade of finish; surface rating
• "表面光洁度分析仪" 英文翻译 :    surface analyzer; surface-finish analyzer
• "表面光洁度记录器" 英文翻译 :    surface finish recorder; surfacefinishrecorder
• "表面光洁度检测仪" 英文翻译 :    profile testing instrument
• "表面光洁度检查仪" 英文翻译 :    surface analyzer; surface finish indicator
• "表面光洁度轮廓仪" 英文翻译 :    micro-profilometer
• "表面光洁度显微镜" 英文翻译 :    surface roughne microscope; surface roughness microscope; surface-finish indicator; surface-finish microscope
• "表面光洁度指示仪" 英文翻译 :    surface finish indicator
• "高级表面光洁度" 英文翻译 :    fine surface finish; superior surface finish
• "光学端面光洁度" 英文翻译 :    optical end finish; optical endfinish
• "精加工，表面光洁度" 英文翻译 :    finish
• "搪后表面光洁度" 英文翻译 :    honed finish
• "表面光制表面光洁度" 英文翻译 :    surface finish
• "表面光洁度测定记录仪" 英文翻译 :    contorograph
• "表面光洁度测量显微镜" 英文翻译 :    surface finish testing microscope
• "电子表面光洁度测量仪" 英文翻译 :    electronic profilometer
• "光学表面光洁度测量仪" 英文翻译 :    surfascope

• The cylinder liner should be polished to mirror surface
  气缸套应磨光到镜面光洁度。
• Seat face stellited , ground and lapped to a mirror finish . conical seat machined to 8 rms
  阀座面为钨铬钴合金，经过研磨抛光达到镜面光洁度。锥形阀座经过机加工，精度达到8rms 。
• Wedge is ground and lapped to a mirror finish and tightly guided to prevent dragging and seat damage
  楔板经过研磨抛光达到镜面光洁度，还经过紧密性引导来防止由于拖动造成阀座的损坏。
• Forged seat is stellited , ground and lapped to a mirror finish for maximum erosion resistance and long service life . it is seal - welded to the body
  阀座采用锻造钨铬钴合金，并研磨和叠层成镜面光洁度，抗蚀能力最强，延长了使用寿命。它是通过密封焊接到阀体上的。
• Seat rings are long to compensate for temperature fluctuations and are seal - welded . seating faces are hardfaced with stellite 6 , ground and lapped to mirror finish
  阀座环较长，并且是密封焊接的，能够补偿温度波动。阀座面用钨铬钴合金6硬化，研磨和层叠为镜面光洁度。
• Robust body with raised seating surfaces ground to mirror - like finish . hard plug and body seat facings available . body and plug seats protected from line media in open - close positions
  坚固耐用的阀体，配置具有研磨镜面光洁度的凸面阀座表面。可提供坚硬的阀塞和阀体阀座面。在开启-关闭位置，可防止管路流体介质进入阀体和阀塞阀座内。
• Moreover , in order to pursue dimensional precision and shorten the time required for grinding , we make the surface roughness of the electro - discharge and nc direct carving processes as small as possible , and apply this technique to the light guide plates , etc . , for which mirror polishing is required
  为追求尺寸精度和缩短打磨加工时间,我们尽可能降低放电加工和nc直雕面的粗糙度,并应用于要求具有镜面光洁度的导光板等加工中。
• At last , the surface of the alumina femoral head was grade - polished with sic micropowder and diamond grinding cream , the join part was trimmed with specific instrument , which made the surface of the alumina femoral head reach the degree of approximating mirror finish and match the femoral stem well . the artificial partial hip joint prostheses was finally got by articulating the alumina femoral head with ti alloy femoral stem coated with bioactive coating
  最后，采用sic超细粉和金刚石研磨膏对氧化铝陶瓷股骨头表面进行分级抛光，用专用器械修整其联接部位，得到表面具有近似镜面光洁度并与股骨柄配合良好的氧化铝陶瓷股骨头，并与表面涂覆生物活性涂层的钛合金股骨柄配伍，最终获得人工半髋关节假体。