compression molding中文是什么意思

• 加压模制
• 模压成型
• 模压法
• 平板硫化法
• 压力成型
• 压模成型
• 压模成形法
• 压塑法
• 压缩成型
• 压缩成形
• 压缩模塑法
• 压缩模制

• compression    n. 1.压缩；压紧；浓缩，紧缩。 2.加压；压抑。 3 ...
• molding    molding ＝ moulding.
• automatic compression molding    自动加压模制; 自动压塑
• cold compression molding    冷压模制法
• compression and transfer molding    压送模塑法
• compression blow molding    压坯吹塑
• compression molding compound    模压胶料
• compression molding machine    压塑机
• compression molding material    压塑料
• compression molding powder    压塑粉
• compression molding press    平板硫化机; 压力成形机
• compression molding pressing    压缩成型
• compression molding pressure    平板压力
• compression molding technique    压塑技术
• compression molding test specimen    压塑试样
• compression-injection molding    模压注压法
• injection compression molding    注塑压缩成型
• rotary compression molding press    旋转式压缩成型机
• be in compression    受压（缩）
• compression    n. 1.压缩；压紧；浓缩，紧缩。 2.加压；压抑。 3.(表现的)简练。 4.应压试验。 compression of ideas 思想的概括。 compression of the earth 地球椭[扁]率。
• in compression    受压
• laminate molding (= laminating molding)    层压成形
• laminating molding (= laminate molding)    层压成形
• autoclave molding    高压釜成型; 高压釜模塑; 热压罐成型; 热压模制; 蒸压罐模制法
• automatic molding    自动模塑

• First , polytetrafluoroethylene ( ptfe ) composites filled with various contents of glass fibers ( gf ) and graphite were prepared by compression molding . the screening friction and wear tests were carried out in a reciprocating sliding tribotester . it is found that the optimal ptfe composite was a ptfe - 25wt . % gf - 5wt . % graphite amongst the composites
  采用石墨与短玻璃纤维( sgf )填充ptfe ,制备出一系列ptfe复合材料,在往复式滑动摩擦试验机进行筛选试验,结果发现: ptfe - 25 % sgf - 5 %石墨复合材料的摩擦系数与比磨损率都比较低。
• Simulation and the associated numerical algorithm on the injection - compression molding ( icm ) process were developed to understand processing characteristics by changing processing parameters including compression speed , switch time from injection to compression , compression stroke as well as initial cavity thickness and part thickness using disk parts
  摘要射出压缩成型的仿真以及数值运算是要了解成型参数的改变，包括：压缩速度、射出与封装的切换时间、压缩行程等制程特性而创建的，同时也包含了初始的开模厚度以及使用在光盘片的成品厚度。
• In this paper , ptfe and ptfe composited with sicp , sicw , mos2p and sicp + mos2p with various ratios respectively have been obtained by compression molding . under the condition of dry friction , a systematic study has been done on the weight loss and the friction coefficient of composites and the relations between the properties and content of the filling , the load and the sliding velocity
  在干摩擦滑动磨损条件下，对ptfe材料及其复合材料的磨损失重、摩擦系数及磨损机理进行了研究，同时对其与磨损外部条件(载荷、滑动速度)和材料的内部因素(填料的含量、粒径、种类)的关系进行了较为系统的研究。
• By using the high pure alumina micro - powder ( > 99 . 0 % ) and the polymorphous alumina fiber as materials , by adding alumina sulfate as the binder or polypropylene - amide as the disperser respectively , through mixing , dispersing , and compression molding , at different temperatures of 1200 c , 1350 c , 1400 c , 1500 c , and 1550 c with no pressure , the alumina fiber - alumina composites were made
  本试验采用高纯氧化铝微粉( 99 . 0 )和多晶氧化铝纤维为原料，分别加入硫酸铝和聚丙烯酰胺作结合剂和分散剂，经混合、分散、压力成型及在1200 、 1350 、 1400 、 1500 、 1550下无压烧成制得氧化铝纤维? ?氧化铝复合材料。
• Simulation and the associated numerical algorithm on the injection - compression molding ( icm ) process were developed to understand processing characteristics by changing processing parameters including compression speed , switch time from injection to compression , compression stroke as well as initial cavity thickness and part thickness using disk parts
  摘要射出压缩成型的模拟以及数值运算是要了解成型参数的改变，包括：压缩速度、射出与压缩的切换时间、压缩行程等制程特性而建立的，同时也包含了初始的开模厚度以及使用在光碟片的成品厚度。

• compression moldingとは意味：圧縮成形｛あっしゅく せいけい｝