ablates造句

• Spectro-analysis of gas breakdown in laser-induced plasma during laser ablating metal
  激光烧蚀金属靶时气体电离分析
• Methods 126 cases with ablating parotid glands were retrospectively analyzed
  方法对126例腮腺切除术病例进行回顾性分析。
• Objective to analyze the causes of facial palsies after ablating parotid glands
  摘要目的分析126例腮腺切除后产生面瘫的原因。
• ablating heat shield
  烧蚀热防护
• Catheter mapping and ablation of unsuccessful atrioventricular accessory pathway ablated by conventional methods through
  鞘标测和消融常规方法消融失败的房室旁路
• Method : by laser ablating a multiphase reaction system, various products are obtained by plasma reaction
  以脉冲激光溅射多相反应体系，变换固体靶和气相、液相反应物的不同组成，合成得到不同产物。
• Laser marking is a kind of technique using heat effect of laser to ablate meterials on object surface so as to leave over permanent press
  激光打标是利用激光的热效应烧蚀掉物体表面材料从而留下永久标记的技术。
• Super-hard amorphous carbon films were deposited on such substrates as single-crystalline silicon and k9 glass by pulse laser ablating graphite target
  本文研究用脉冲激光烧蚀石墨靶方法在单晶硅、k9玻璃等衬底上生长超硬非晶碳膜。
• The charter i introduced the schematics of the experimental setup, the model of pulsed laser ablating solid target ( s-n model ) and the subplantation model for film growing proposed by y . lifshitz
  第一章简要介绍了实验装置、激光烧蚀固体靶的s-n模型和y.lifshitz提出的次表面生长模式。
• Methods operation performed under tourniquet, the crusts were ablated down to the superficial layer of deep fascia, and then autologous micro-skin grafting, combined with allogenous skin coverage, was conducted in 13 patients
  方法在止血带下进行手术切痂深度至深筋膜浅层，止血后，异体皮覆盖自体微粒皮移植。
• The reasons which were suggestive of a causal relationship between hemocholecyst and radiofrequency ablation ( rfa ) included : the close proximity of the ablated tumor to the gallbladder, and the " chronological sequence of events "
  由于烧灼位置靠近胆囊与发生时间的先后顺序，因而创建射频烧灼而导致胆囊出血之因果关联。
• By identifying and ablating ( deactiating ) the sources of the abnormal conduction, physicians can help restore normal function and protect patients from complications such as organ failure, heart failure and stroke
  通过标识和消融（灭活）这些异常的传导，医生能够使患者恢复正常的心脏功能，避免了器官功能衰竭、心力衰竭以及中风等并发症的发生。
• It is verified that the temperature of graphitization increases up to 300 ? in the film deposition by hipib ablated plasma, which is much higher than the other film deposition methods with graphitization temperature of less than 200 ?
  当基片温度达到300时所沉积的dlc薄膜中sp~3c含量开始减少，表明hipib烧蚀等离子体沉积的dlc薄膜的石墨化转变温度提高到300(其他方法一般低于200)。
• The laser heats up the diamond and causes the temperature rises on the surface of diamond film . at the different temperature, the different physical and chemic change will happen . the rules of the laser ablating diamond were researched by experiment
  从激光加热和热传导的理论出发，研究了激光传热及其在金刚石表面引起的温度分布情况，以及在不同的温度和激光功率下，金刚石膜发生的不同的物理和化学变化。
• It is found that the ablated surface morphologies for both the ti samples of different roughness have a similar change trend from roughening to smoothing with increasing the shot number, where the surface roughening is relatively weaker at lower ion current density
  通过辐照不同原始粗糙度的纯金属ti发现，随着辐照次数的增加，烧蚀表面形貌均发生表面粗糙化向光滑化的转变。离子束流密度较低时，辐照表面的粗糙化程度较弱。
• Abstract : during the measurement of optical nonlinearities of sample in the thin film by z-scan technique, ablating makes a hole in the thin film if the incidental laser power is too high, that will produce the error to measurement results
  文摘:用单光束扫描法研究薄膜材料的非线性光学性质时，如果入射样品的激光功率过大，将会烧蚀薄膜而产生孔洞，虽然其归一化透过率曲线类似于没有烧蚀的情况，但与样品的非线性光学性质无关，因而造成测量结果错误。
• The electronic temperature, intensities of all lines and continuous spectra gradually increased with the increment of laser energy, and they got to maximum at different laser energy . our results of copper and aluminum show that there are possibly different thresholds of laser energy to electronic temperature and intensities of emission spectra of laser ablated plasma . at the different environmental gas pressure, spatial emission intensity distribution is explained by the competition among " heat reservoir effect ", " confined effect " and " s hadow effect "
  认为cu等离子体羽的发光机制是由电子与粒子的碰撞传能、电子与离子的复合形成的；随激光能量的增加，cu等离子体特征辐射(分立谱)、连续背景辐射(连续谱)、电子温度都出现最大值；结合对al的实验结果说明：激光烧蚀金属产生的等离子体，其特征辐射、连续辐射、电子温度可能都存在一定的能量阈值；背景气压对激光烧蚀等离子体谱线的影响，其机理可以认为是“热库效应”、“约束效应”及“阴影效应”相互竞争的综合结果。
• The experimental results show that dlc film could be deposited on silicon substrate rapidly and uniformly in a large area by means of ablated plasma jet generating on the target surface during hipib irradiation, the instantaneous deposition rate is as high as imm / s and the uniform deposition area covered 40-50 cm2
  实验结果表明，利用hipib烧蚀等离子体在si基体上可以实现快速、大面积、均匀地沉积类金刚石薄膜，薄膜的瞬时沉积速率达到1mms，均匀薄膜的面积达到40?50cm~2。
• In the hipib film deposition, high purity graphite was employed as target . relations between process parameters and the microstructure, as well as different physical properties of diamond-like carbon ( dlc ) film deposited by hipib ablated plasma were studied by adjusting the distance between target and substrate, which affects the intensity and ion energy of hipib ablated plasma, and the temperature of substrate in the film deposition processes . the mechanism of film deposition by hipib ablated plasma was explored also
  在薄膜沉积方面，利用高纯石墨作靶材，调整薄膜沉积过程中的靶基距(烧蚀等离子体密度、离子能量)和基片温度，研究实验工艺对hipib烧蚀等离子体方法制备的dlc薄膜的微观结构和宏观物理性能的影响，探讨了hipib烧蚀等离子体沉积dlc薄膜的成膜机理。
• In the hipib film deposition, high purity graphite was employed as target . relations between process parameters and the microstructure, as well as different physical properties of diamond-like carbon ( dlc ) film deposited by hipib ablated plasma were studied by adjusting the distance between target and substrate, which affects the intensity and ion energy of hipib ablated plasma, and the temperature of substrate in the film deposition processes . the mechanism of film deposition by hipib ablated plasma was explored also
  在薄膜沉积方面，利用高纯石墨作靶材，调整薄膜沉积过程中的靶基距(烧蚀等离子体密度、离子能量)和基片温度，研究实验工艺对hipib烧蚀等离子体方法制备的dlc薄膜的微观结构和宏观物理性能的影响，探讨了hipib烧蚀等离子体沉积dlc薄膜的成膜机理。