clamping造句

• The wood is held in position by a clamp .
  木头用钳夹固定住了。
• I'm glad he clamped down on them .
  我很高兴他对他们严厉一些。
• Naturally, his mind clamped down .
  他心里自然地揪紧起来。
• I clamped my teeth to keep from uttering a single whimper .
  我咬紧牙关，一声不出。
• The diaphragm was clamped between two support housings .
  隔膜被夹紧在两个支承套之间。
• If the tubing is to remain in a place, the end is clamped .
  如果要固定导管，就要夹住管端。
• Bigger's teeth clamped so tight that his jaws ached .
  别格的牙关咬得那么紧，连上下颚都疼了。
• Its lower end is anchored at the erection truss by a clamp .
  其下端由一夹钳锚定在施工桁梁上。
• He checked that clamp .
  他检查了那只夹子。
• The blade is clamped and excited into some mode of vibration .
  叶片夹好后，被激发进入某种振动状态。
• Blood-vessel cuts made by laser beams do not need clamps or stitches
  用激光束切开的血管不需要夹紧或缝合。
• The contact area between clamp and terminal is either silver or copper .
  夹头和电极之间的接触面是银的或铜的。
• In the school shop it is used for projects like hammer heads and clamp parts .
  在校办工厂里由它制作锤头和夹具之类的产品。
• In the school shop, it is used for projects like hammer heads and clamp parts .
  在校办工厂里人们用它制作锤头和夹具之类的产品。
• A modest clamping pressure is recommended for the epoxies during the cure period .
  有人建议在治疗期内对环氧树脂施加中等的夹持压力。
• Another consideration is slippage, which might occur at a clamp or joint .
  另外一个要考虑的问题是滑移。滑移可能产生于夹紧或联结处。
• To prevent damage, the observer will choose a friction clamp or better still an adjustable clamping ring .
  为防止损坏，观测者应采用摩擦夹紧方式，用可调夹圈更好。
• Torsional microslip at the clamps results in spurious torques which act like pivot friction torques .
  夹紧处扭杆的微小滑移会产生干扰力矩，它的作用和轴颈的摩擦力矩一样。
• The surface of the table is cut with t slots so that workholding devices such as the vise can be clamped to them .
  工作台的表面切有T形槽以便工件夹具，如台钳，能固定在T形槽上。
• Faced by the brute obtuseness of the ocean, the miles of division, one was clamped down, one was helpless .
  面对着这蛮横而愚钝的大洋，面对着这茫无边际的隔绝屏障，谁都会觉得束手无策，谁都会感到孤立无援。