resisters造句

• A variable resister is called a rheostat .
  可以调节的电阻器叫做变阻器。
• Single choke be used, and 1 diode, 1 resister and 2 transistors are necessary
  5v，使用单一抗流器、1个二极体和2个电晶体是必要的。
• If rosc pin series a resister to vdd, or connect a capacitor to vss, the switching frequency can be adjusted
  切换频率是由osc频率决定，以rosc脚串联电阻到vdd，可调整切换频率，电阻值减少，频率增加。
• Tin soldering method is to solder neon lamp with tin material to connect the resister or lead wire . it is easy to connect and disconnect them
  锡焊接氖灯是把氖灯和电阻或导司丝通过锡焊连接起来，优点是容易连接和分离。
• "truth, purity, self-control, firmness, fearlessness, humility, unity, peace, and renunciation-these are the inherent qualities of a civil resister .
  真理，纯洁，自我控制，坚定，无畏，谦卑，团结，和平，是一个反抗者必须具备的品质。
• If rosc pin connect a resister to vdd, the switching frequency can be adjusted; the value of resister decreases, the frequency will go higher
  切换频率是由osc频率决定，以rosc脚串联电阻到vdd，可调整切换频率，电阻值减少，频率会增加。
• If rosc pin connect a resister to vdd, the switching frequency can be adjusted; the value of resister decreases, the frequency will go higher
  切换频率是由osc频率决定，以rosc脚串联电阻到vdd，可调整切换频率，电阻值减少，频率会增加。
• The switching frequency is decided by osci frequency . if rosc pin series a resister to vdd, or connect a capacitor to vss, the switching frequency can be adjusted
  切换频率是由osc频率决定，以rosc脚串联电阻到vdd，或串联电容到vss，可调整切换频率。
• St1689e has build-in switching frequency but can be decreased by connecting a cap . to osci . if rosc pin connect a resister to vdd, the switching frequency can be increased
  st1689已内建切换频率，但接电容到osci可降低之，以rosc脚串联电阻到vdd，则切换频率增加。
• St1688nd has build-in switching frequency but can be decreased by connecting a cap . to osci . if rosc pin connect a resister to vdd, the switching frequency can be increased
  st1688已内建切换频率，但接电容到osci可降低之，以rosc脚串联电阻到vdd，则切换频率增加。
• Single choke be used, 1 diode ( or 2 diodes ), 4 transistors and 1 resister are necessary . dj3033 support el1 and el2 output pins to control 2 el to flash
  5v，使用单一抗流器、1个二极体(或2个二极体)、4个电晶体和1个电阻是必要的，dj3033-1支援el1和el2输出脚位来控制2片el闪烁。
• The 2-stage differential transconductance amplifier is used in the design to achieve high gain . in the design of amplifier, a resister and a miller capacitor is used to deal with the stability and frequency compensation
  系统中采用差分跨导运算放大器的设计，为了保证其具备高增益与高稳定性，选用二级结构，并且增加了补偿电容和电阻。
• In this thesis, a convenient designing method for the microwave broadband power equalizer has been proposed, with a circuit template based on the microstrip resonators loaded resister is designed and optimized by cad, and finally achieve the practice broadband microwave power equalizer that satisfies the target
  本文对mpm中的微波宽带功率均衡器进行了研究,提出了一种切实可行的设计方法。该方法以电阻加载的微带谐振器枝节为基本结构组成电路拓扑结构,用计算机优化方法对该电路模板进行优化设计,并且最终实现满足要求的宽带微波功率均衡器。