下层结构的英文

• infrastructure
• subsurface structure
• understructure

• "下层"英文翻译    lower levels
• "结构"英文翻译    structure; composition; cons ...
• "下层结构；底层结构" 英文翻译 :    substructure
• "下层结构振动" 英文翻译 :    substructure vibration
• "底层结构；下层结构；地下建筑" 英文翻译 :    substructure
• "支持圆顶之下层结构" 英文翻译 :    tholobate
• "层结构" 英文翻译 :    stratification structure
• "薄板层结构" 英文翻译 :    slaty structure
• "薄层结构" 英文翻译 :    shell stucture
• "表层结构" 英文翻译 :    surface structure
• "层结构系统" 英文翻译 :    hierarchically-structured system
• "磁层结构" 英文翻译 :    magneto spheric structure
• "单层结构" 英文翻译 :    single layer structure; single-layer structure
• "底层结构" 英文翻译 :    fabric; infrastucture; substruction; underlying structure
• "地层结构" 英文翻译 :    stratal configuration; stratigraphic configuration; stratum structure
• "电离层结构" 英文翻译 :    ionospheric structure
• "叠层结构" 英文翻译 :    laminated construction; laminated system; lamination; nappe; rhythmic structure; rhythmo structure
• "多层结构" 英文翻译 :    layered construction; multi layer organization; multi layer structure; multilayered structure; multilayerorganization; multiple layer architecture; sandwich-like structure; stacked arrangement
• "二层结构" 英文翻译 :    two-tiered architecture
• "非纹层结构" 英文翻译 :    crystic texture
• "分层结构" 英文翻译 :    hierarchical organization; hierarchical structure; hierarchy; layered architecture; layered structure; sandwich; tiered architecture; tiered structure
• "覆盖层结构" 英文翻译 :    capping structure
• "附面层结构" 英文翻译 :    boundary layer structure
• "高层结构" 英文翻译 :    high-rise structure
• "高层结构物" 英文翻译 :    tall structures

• Tta for construction of bored pile and substructure of bridge c7
  桥钻孔桩及下层结构的临时交通管理措施
• Site investigation , site formation , piling , caissons or other sub - structure work ; (
  地盘勘查、地盘平整、打桩、沉箱或其他下层结构工程；
• Roofing and wall cladding - determination of the characteristic resistance of the assembly - test method to determine pull - out load of fasteners in crown or valley fixing out of their subconstruction
  屋顶和墙面覆盖层.耐安装特性的测定.固定在拱顶或屋谷下层结构之外的紧固件的拉出力测定的试验方法
• Roofing and wall cladding - determination of the characteristic resistance of the assembly - test method to determine the pull - out load of the plates assembly from the subconstruction for plates made from steel or aluminium
  屋顶和墙面覆盖层.耐安装特性的测定.钢制或铝制板材用的板材组件从下层结构中抽出的负载测定的试验方法
• The goal of this paper was to study and bring forward a model of collaborative wfms to support diversiform virtual enterprises whose styles of affiliation are easily to change . the infrastructure of the system was based on event technology
  本文的目标就是研究并提出一个灵活的协同工作流管理系统模型，以支持多种多样的、而且联盟形式易于改变的虚拟企业， wfms的下层结构采用事件技术来实现。
• Culture is nothing more than a superstructure built on the material bases , so the two feature of chinese strategic culture are both the products of some particular material structure . " to defeat the enemy without combat " is a strategic culture of agriculture civilization
  文化是建立在物质条件下层结构之上的上层结构，本文据此主张，中国不战而屈人之兵与文化道德主义这两项战略文化的背后，都有其物质条件为基础，分别是农业文明与单极的权力结构。
• Some aseismic design concepts of tube structure with transfer storey , including the level of transfer storey , the change rate of equivalent stiffness , the change rate of lateral stiffness , are presented . transfer brackets are used in shenzhen fujian xingye bank for extention and setback along the height of the building
  文中给出了带转换层简体结构抗震设计的几个概念，包括：限制转换层设置高度，控制转换层上、下层结构的等效刚度比，控制转换层与其上一层侧向刚度比等。
• To achieve information integration in manufacture process , this paper , with reference to dnc , researches into manufacture process information integration from 3 aspects : data level , function level , application level , presents the management information integration framework （ miif ） based on distributed control technology , builds meta - agent and application agent by regarding agent as an entity having special behavior ability and specific action objective , establishes agent control model , and then gives the collaborative solution . with field - bus technology and agent technology , the dnc system model based on agent technology is established which shows a efficient way of device integration . a general model of device integration is set up , and an agent model based on soft plug - in technology is built
  该模式包括面向制造过程的车间生产管理与控制的上层结构和面向车间设备的加工控制的下层结构；为实现制造过程信息的集成，本文从三个层面：数据层面、功能层面、应用层面上阐述了车间制造过程信息的集成方式，并借鉴dnc思想，建立了基于分布式控制技术的制造过程信息集成框架（ miif ） ；采用面向对象方法，对miif中的代理体从定义抽象、结构和功能等进行了深入研究；从知识层面上的三个层次：语言规范、会话机制、问题域对miif的多agent协作进行研究，建立了多agent交互的形式化模型。