传递模的英文

• transfer mold

• "传递"英文翻译    transmit; deliver; pass on; ...
• "模"英文翻译    mould; pattern; matrix
• "传递模塑" 英文翻译 :    transfer molding; transfer moulding
• "传递模塑法" 英文翻译 :    transfer molding; transfer moulding
• "传递模塑压" 英文翻译 :    transfer molding pressure
• "传递模型法" 英文翻译 :    transfer forming
• "传递模压法" 英文翻译 :    flow molding
• "传递模压机" 英文翻译 :    transfer molding press
• "热传递模式" 英文翻译 :    heat-transfer model
• "传递模糊关系" 英文翻译 :    transitive fuzzy relation
• "传递模塑压床" 英文翻译 :    transfer molding press
• "传递模型模具" 英文翻译 :    transfer mould
• "分组传递模式" 英文翻译 :    ptm packet transport mode
• "固定式传递模" 英文翻译 :    fixed transfer mold
• "同步传递模块" 英文翻译 :    stm
• "同步传递模式" 英文翻译 :    synchronous transfer mode stm
• "选择传递模式" 英文翻译 :    transfer mode
• "移动式传递模" 英文翻译 :    portable transfer mold
• "异步传递模式" 英文翻译 :    atm: asynchronous transfer mode
• "传递模塑用塑料" 英文翻译 :    transfer molded plastic
• "传递模塑机预热填料室" 英文翻译 :    transfer pot
• "热膨胀树脂传递模塑" 英文翻译 :    tertm
• "下注塞式传递模压机" 英文翻译 :    bottom transfer press
• "选择传递模式 和层 的模式相同的" 英文翻译 :    transfer mode
• "传递" 英文翻译 :    transmit; deliver; pass on; hand down [round; around]; transfer; hand over sth. one after another; transmission; transference; delivery; transmital 传递经济信息 transmit economic information; 传递眼色 give a wink by way of hint; 传递信件 deliver mail; 传递消息 convey news; 这封信在传递中被耽误了。 the letter was delayed in transmission. 把消息分程传递到某地 relay a message to a place

• Tertm thermal - expansion resin transfer molding
  热膨胀树脂传递模塑
• Standard practice for transfer molding test specimens of thermosetting compounds
  热固化合物传递模塑试样的标准操作规程
• Fibre - reinforced plastics - methods of producing test plates - part 7 : resin transfer moulding
  纤维增强式塑料制品.试验板的生产方法.第7部分:树脂传递模制法
• Ea - 7709j is a type of amino molding compound . it is suitable for injection process with good performance , and also for transfer or compression process
  本产品属于氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。
• Ea - 7708j is a type of amino molding compound with fiberglass . it is suitable for injection process with good performance , and also for transfer or compression process
  本产品是玻璃纤维增强的氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。
• Resin transfer molding ( rtm ) has drawn more attention in the last decade because its manufacture cost is significantly lower than traditional techniques of fabricating fiber - reinforced composites
  树脂传递模塑resintransfermolding ( rtm )是近年来飞速发展的一种低成本高效率的复合材料成型技术，目前已被广泛应用于航空、汽车等工业中。
• Ea - 7504j is a type of amino molding compound modified by phenol , which is added fiberglass as reinforcement . it is suitable for injection process with good performance , and also for transfer or compression process
  本产品是以苯酚改性的三聚氰胺-甲醛树脂为基体树脂，以有机纤维增强的改性氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。
• Ea - 7501j is a type of amino molding compound modified by phenol , which is added fiberglass as reinforcement . it is suitable for injection process with good performance , and also for transfer or compression process
  本产品是以苯酚改性的三聚氰胺-甲醛树脂为基体树脂，以玻璃纤维增强的改性氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。
• Ea - 7503j is a type of amino molding compound modified by phenol , which is added fiberglass as reinforcement . it is suitable for injection process with good performance , and also for transfer or compression process
  本产品是以苯酚改性的三聚氰胺-甲醛树脂为基体树脂，以玻璃纤维增强的改性氨基模塑料，适宜于注塑成型，工艺性能良好同时适用于传递模塑成型或压制成型。