使粘结的英文

发音:

"使粘结"怎么读用"使粘结"造句

英文翻译手机版

felt

"使"英文翻译 send; tell sb. to do sth.
"粘结"英文翻译 cohere; bond; cementation
"粘结" 英文翻译 : cohere; bond; [工业] cementation◇粘结材料 binding material; 粘结剂 [冶金学] binder; bond; agglomerant; binding admixture; cohesive material; plastering agent; 粘结力 binding power; cementing bond; cohesion; cohesive force; 粘结强度 bond [bonding] strength; cohesive strength
"使粘土稳定聚合物" 英文翻译 : clay stabilizing polymer
"粘结剂粘结" 英文翻译 : bond between binder and aggregate
"点粘结" 英文翻译 : spot gluing
"胶粘结" 英文翻译 : glue connection
"抗粘结" 英文翻译 : anti-stick
"热粘结" 英文翻译 : thermal caking
"油粘结" 英文翻译 : caking of oil
"粘结；接驳" 英文翻译 : bond
"粘结层" 英文翻译 : adhesive layer; binder coat; binder course; binding course; bond course; bonding layer; tack coat; tack course; tie coat
"粘结的" 英文翻译 : astringent; bonded; caked; caking; cementitious; coherent; cohesive
"粘结点" 英文翻译 : bond point; upper plastic limit
"粘结度" 英文翻译 : caking ability; cakingability; coherency
"粘结法" 英文翻译 : bonding process; mull technique
"粘结缝" 英文翻译 : adhesive-bonded joint
"粘结灰" 英文翻译 : sintered ash
"粘结机" 英文翻译 : cementing machine; glue machine
"粘结剂" 英文翻译 : adhesion agent; adhesive composition; agglomerant; agglutinant; binder spray; binding admixture; binding agent; binding element; binding material; bindingmaterial; bonder; bonding agent; bonding characteristic; caking agent; cementer; cementing agent; cementing material; cementingagent; cementitious agent; coherent material; cohesive material; glue; plastering agent; sticker; tiradaet
"粘结键" 英文翻译 : cement bond
"粘结胶" 英文翻译 : adhesive; assembly glue; binder
"粘结力" 英文翻译 : adhesion stress; adhesive force; agglutinating power; binding glue; binding power; bond stress; bonding force; bonding power; bounding capacity; caking power; cementing bond; cohesion; cohesive force; tenacity
"粘结料" 英文翻译 : binders; bond; caking power; cohesion force
"粘结煤" 英文翻译 : baking coal; bakingcoal; binding coal; bindingcoal; caking coal; cakingcoal; close burning coal; crozzling coal; sintering coal; soldering coal

例句与用法

It has shown that the combination with higher magnetic and mechanic properties of the bonded magnet is presented on the basis of proper curing process temperature , 120 cto 150 c , and the curing agent is and proper mold press , 500 - 600mpa , keeping press time is 20 seconds
固化工艺中的固化温度不宜过低，应以120到150之间为宜。在压制过程中，模压压力为500 600mpa ，保压时间为20秒时可以使粘结磁体的密度达到最高值，且具有较好的磁性能和力学性能。