共析的英文

发音:

"共析"怎么读用"共析"造句

英文翻译手机版

[冶金学] eutectoid
◇共析成分 eutectoid composition; 共析点 eutectoid point; 共析法 eutectrol process; 共析钢 [冶金学] eutectoid steel; saturated steel

"共"英文翻译 common; joint; mutual; gener ...
"析"英文翻译 divide; separate
"共析出" 英文翻译 : coprecipitation
"共析点" 英文翻译 : cotectic point; cotecticpoint; eutectoid point
"共析法" 英文翻译 : eutectrol process
"共析钢" 英文翻译 : eutectoid steel; saturated steel; true steel
"共析面" 英文翻译 : cotectic surface; cotecticsurface
"共析体" 英文翻译 : eutectoid
"共析系" 英文翻译 : eutectoid system
"共析线" 英文翻译 : cotectic curve; cotectic line; cotecticcurve; cotecticline; eutectoid horizontal; eutectoid line
"过共析" 英文翻译 : hypereutectoid◇过共析钢 hypereutectoid steel
"前共析" 英文翻译 : proeutectoid
"先共析" 英文翻译 : pro-eutectoid
"亚共析" 英文翻译 : hypoeutectoid
"先共析体；前共析" 英文翻译 : proeutectoid
"【冶金】共析钢。" 英文翻译 : saturated steel
"二元共析" 英文翻译 : binary eutectoid
"共析成分" 英文翻译 : eutectoid composition; eutectoidcomposition
"共析的；共结晶" 英文翻译 : eutectoid
"共析反应" 英文翻译 : eutectoid reaction
"共析分解" 英文翻译 : eutectoid decomposition
"共析合金" 英文翻译 : eutectoid alloy
"共析混合物" 英文翻译 : eutectoid mixture
"共析结构" 英文翻译 : eutectoid structure
"共析平衡" 英文翻译 : dystectic equilibrium; eutectoid equilibrium

例句与用法

The eutectoid compounds are very slow in forming .
共析物的形成是非常缓慢的。
Standard practice for quantitative measurement and reporting of hypoeutectoid carbon and low - alloy steel phase transformations
亚共析碳钢和低合金钢相位变换的定量测量和报告的标准规程
Based on the analysis of eutectoid transformation of sg ( spheroidal graphite ) iron , the numerical model of formation of ferrite and pearlite during the eutectoid transformation was improved
摘要通过对球墨铸铁件共析转变的分析，改进了球铁件中铁素体与珠光体形成的数学模型。
The microstructure evolution of ferrite and pearlite in ecap was investigated by means of optical m icroscopy ( om ) and transmission electron microscopy ( tem )
并运用光学显微镜( om ) 、透射电子显微镜( tem )及维氏显微硬度仪研究了ecap变形后45钢中先共析铁素体及珠光体组织的演变特征。
It is indicated that the improved model can calculate the fraction of ferrite and pearlite more accurately , and can specially reflect the effect of both undercooling during the eutectoid transformation and the amount of graphite nodules formed during the process of eutectic reaction on the fraction of pearlite
结果表明，改进的模型可以更准确地预测球铁中铁素体和珠光体的数量，能够准确地体现共析阶段过冷情况和共晶球墨数对珠光体数量的影响。
The segregation mechanism of tramp element sn during continuous cooling and isothermal aging and its influence on the hot ductility of low carbon steel are discussed and the brittleness during continuous casting of the sn - doped low carbon steel is forecasted . at a strain rate of 10 - 2s - 1 and a cooling rate of 10 / s , there exists a third ductility trough for both steels at 750
在应变速率和冷却速率分别为10 ~ ( - 2 ) s和10 s的条件下进行热模拟拉伸时，两种试验钢均在750时出现由先共析铁素体沿奥氏体晶界呈薄膜网状析出所引起的第类脆性谷底。
According to the nb - si phase diagram , the temperature of 1550 ? , which is lower than the eutectoid transformation temperature of nbssi ( 1783 ? ) , is chosen for heat - treatment . according to the present conditions of the furfaces , heat - treatment by stages is first proposed for the nb - si system intermetallic composites to keep the furface in good conditions . the results indicate that the equilibrium nb + nbssia dual - phase microstructure of the nb - si system intermetallics forms gradually via such eutectoid reaction as nbasi ? nb + nbssis with the heat - treatment time
根据nb - si二元相图，选择略低于nb _ 3si共析转变温度t _ f = 1783的1550对铸态nb - si系金属间化合物进行不同时间( 25h - 100h )的热处理，并根据目前国内和我院热处理炉的现状，首次提出采用分段热处理的方法来解决nb - si合金热处理温度高、连续热处理时间过长而影响热处理炉寿命的困难。