内回流的英文

• induced reflux
• internal reflux

• "内"英文翻译    inner; inside; within
• "回流"英文翻译    back-flow; inverse flow; cou ...
• "内回流比" 英文翻译 :    internal reflux ratio
• "塔内回流分布" 英文翻译 :    distribution of reflux
• "肾内反流,肾内回流" 英文翻译 :    intrarenal reflux
• "内回" 英文翻译 :    uchi mawashi geri inside crescent kick
• "回流" 英文翻译 :    back-flow; inverse flow; counter-flow; backwash; return streamer; receding backflow; blowing back; return; [化学工业] reflux◇回流比 reflux ratio; 回流波痕 backflow ripple; 回流槽 backflash; 回流电路 return curcuit; 回流阀 reflux valve; return valve; 回流管 return pipe; 回流量 phegmal reflux; quantity of reflux; 回流率 reflux ratio; 回流装置 reflux
• "内回归" 英文翻译 :    internal regression
• "内回路" 英文翻译 :    inner loop
• "堆内回路" 英文翻译 :    in-pile loop; in-reactor loop
• "儿头内回转" 英文翻译 :    internal cephalic version
• "分子内回转" 英文翻译 :    intramolecular rotation
• "内回车道" 英文翻译 :    inner loop
• "内回型阵" 英文翻译 :    phalanx inside
• "内回转术" 英文翻译 :    internal podalic version
• "群内回归" 英文翻译 :    regression within group
• "心房内回路" 英文翻译 :    intra-atrial circuits
• "组内回归" 英文翻译 :    regression within group
• "回流柱；回流塔" 英文翻译 :    reflux column
• "低振幅内回波" 英文翻译 :    lower amplitude internal echo
• "堆内回路实验" 英文翻译 :    in-pile lootest
• "复合型内回声" 英文翻译 :    complex internal echo pattern
• "结构内回应谱" 英文翻译 :    in-structure response spectra
• "内回授放大器" 英文翻译 :    self feedback amplifier; self-feedback amplifier
• "气化器内回路" 英文翻译 :    vic

• Reflow solder paste in 2 hours as soon as possible after printing
  印刷后要在2小时内回流焊膏。
• Finally , three representative control strategies , such as the control of external carbon flow rate , the supervision control of the do process and the control of internal recirculation flow rate , are used in the simulator under different weather conditions , in order to analysis the practicability and feasibility of the simulator
  论文最后主要通过输入不同气候条件的输入组分数据，采用外加碳源控制、溶解氧浓度监控控制和内回流流速控制三种典型的控制策略，分析本研究开发的仿真软件在活性污泥过程的应用。
• The simulations results show that the spoiler is available to make the fuel and the oxidizer coming from the former to stay in the cavity for a long time , to let the fuel and oxidizer mix and burn completely . since there is a high temperature zone forming by vortex in the middle of the motor , it required a restricted thermal protection . the plate with holes decreased the vortex function in the cavity , which could not promote the combustion efficiency , but to decrease temperature in the cavity and be benefit to thermal protection of the wall
  计算结果分析表明:扰流板可以使燃料和氧化剂在扰流腔内的滞留时间加长,促进燃料与氧化剂的掺混燃烧,提高燃烧效率,但由于涡流在发动机的中间部位形成了高温燃烧区域,致使局部燃料和绝热层烧蚀速率增大,加大了热防护的难度;孔板结构减弱了扰流腔内回流区的漩流作用,不能增加推进剂燃烧效率,但可以使扰流腔内的温度降低,给壁面热防护带来好处。

• 内回流的法语：reflux interne