加工面的英文

发音:

"加工面"怎么读用"加工面"造句

英文翻译手机版

finish surface
finished surface
machined surface
machining face

"加工"英文翻译 process; machining; working; ...
"面"英文翻译 face
"超精加工面" 英文翻译 : superfinish surface
"机器加工面" 英文翻译 : machined surface
"机械加工面" 英文翻译 : machined surface
"加工面积" 英文翻译 : working area
"加工面微裂" 英文翻译 : flake
"镜面加工面" 英文翻译 : mirror finished surface
"弄坏加工面" 英文翻译 : deface the surface
"坡口加工面" 英文翻译 : prepared edge; preparededge
"已加工面" 英文翻译 : processed surface
"机加工面无损伤" 英文翻译 : free from damage on the machined surface
"加工面与刀杆间(在平面上)装置角" 英文翻译 : setting angle
"施工面" 英文翻译 : working face
"电镀工面罩" 英文翻译 : electroplaters mask
"电焊工面罩" 英文翻译 : welding hood
"焊工面罩" 英文翻译 : hand screen; welders helmet; welder'shelmet; welding helmet
"竣工面积" 英文翻译 : completed residential areas
"喷砂工面罩" 英文翻译 : abrasive blasting respirator
"施工面积" 英文翻译 : floor space under construction
"施工面展开" 英文翻译 : construction unfolds
"加工" 英文翻译 : (对原材料、半成品等做各种工作, 使符合规定要求) process; machining; working; handling; treating; in-process; fabrication 机加工 machining; 冷加工 cold working; 加工中草药 process medicinal herbs; 工业加工 industrial processing; 来料加工 processing of investor's raw materials; processing raw materials on client's demands; 来样加工 processing according to investor's samples; 食品加工 food processing; 艺术加工 artistic treatment; 影片加工 film process; 用全新的方法把废纸加工成新闻纸 manufacture newsprint waste paper under an entirely new process; 加工厂 fabrication plant; processing factory; 加工成本 finished cost; 加工程序 job gram; job sequence; workpiece programme;加工船 factory ship; 加工方法 job operation; processing method; 加工费 processing charges; machining cost; 加工工业 processing industries; 加工留量 allowance; allowance for finish; finishing allowance; 加工贸易 processing trade; improvement trade; 加工能力 working ability; 加工硬度 workhardness; 加工周期 process-cycle; processing cycle
"盔式护罩焊工面罩" 英文翻译 : helmetshield
"手持式焊工面罩" 英文翻译 : hand shield
"面可归类为新鲜手工面" 英文翻译 : pasta fresca

例句与用法

Research on smoothness of virtual surface milled based on virtools platform
的虚拟铣削加工面的光顺性研究
Rubber roller ' s rolling press win a continue stamping for efficiency
胶辊旋转传热烫印，胶辊以直线与加工面接触。
Molding surface : such as steel surface coating chromium , honing molding for ceramics hardness
加工面：如钢材表面镀铬陶瓷硬化处理搪磨加工。
Perform this measurement for all finished faces , and take the maximum as the measured value of the straightness
对工件所有精加工面进行测量，取最大值作为直线度的测量值。
Set so that the readings of the test indicator at both ends of the finished face coincide with each other
测量前应进行调节，当测试用指示表处于精加工面两端时，指示表的读数相同。
With the structure of protruding grind surface , strong cutting force , fast releases of heat and perfect outlook for grinding surface
凸状研磨面结构，切削力强，散热快，研磨加工面美观。
The tool made of high ? grade steel with fine plating processing that keeps all blade surfaces remain smooth after cutting & bending
采用优质模具钢制作的弯刀模制作精良，模具加工面经过精密研磨，弯刀无“底面”现象。
When multilayers are applied in imaging system , lacks of uniformity of period thickness in large field will demage the super - polished figure of optics , and decrease the quality of image
多层膜系用于成像光学系统时，周期厚度分布的不均匀性将会破坏光学元件原始加工面形精度，导致成像质量的下降。
Wet grinding is adopted within the possible range if it cannot help , a spray or air will be blew and delivered . because coolant will have a lot of influence on the roughness of grinding surface , surface precision , wheel sharpness and wheel life
在可能范围内采用湿式研磨为宜若不得已，加喷雾或空气吹送，因研磨液对研磨加工面粗度表面精度砂轮锐利性及砂轮寿命都有很大的影响。
Compared with those of as - sprayed ring , hardness and tension strength of area near processing face are increased by 45 % and 40 % respectively . friction mechanical performance of the ring is improved at large extent , and especially the wearing amount is merely 13 % of as - sprayed rings . after dual - direction cyclic pressing , the pore - closed state and the distributing of density and hardness are nearly identical in every part of ring . the friction mechanical property is close to that of single - direction - cyclic - press ring
靠近压力加工面部位,硬度较沉积坯提高了45 % ,拉伸强度较沉积坯提高了40 % 。双向楔压后孔洞闭合、密度硬度分布都比较均匀。单向楔压后,用压力加工面作为摩擦面, al - 20 % si / sicp复合材料的摩擦磨损性能得到大幅度提高,尤其磨损量为楔压前的13 % 。