加载状态的英文

• loaded state

• "加载"英文翻译    loading; straining; stressin ...
• "状态"英文翻译    status; state; condition; st ...
• "半载状态" 英文翻译 :    half cargo condition
• "变载状态" 英文翻译 :    varying load condition
• "承载状态" 英文翻译 :    load condition
• "负过载状态" 英文翻译 :    negative g condition
• "负载状态" 英文翻译 :    load condition; loaded condition; loaded-up condition
• "空载状态" 英文翻译 :    idling condition; light condition; light load condition; light ship condition; lightcondition; no cargo conditions; no load conditions; no-load condition; unloaded state
• "满载状态" 英文翻译 :    full load condition; full load state; full-cargo condition; full-load condition; loaded condition
• "轻载状态" 英文翻译 :    light condition
• "无载状态" 英文翻译 :    no load state
• "压载状态" 英文翻译 :    ballast condition; ballasted condition
• "重载状态" 英文翻译 :    heavy condition
• "部分装载状态" 英文翻译 :    partial loaded condition; partly loaded condition
• "初始装载状态" 英文翻译 :    initial condition of loading
• "船舶空载状态" 英文翻译 :    light shicondition
• "典型装载状态" 英文翻译 :    typical loading conditions
• "短时负载状态" 英文翻译 :    short time load condition
• "峰值负载状态" 英文翻译 :    peak load conditions
• "固定负载状态" 英文翻译 :    continuous rating
• "空船压载状态" 英文翻译 :    ballasted condition
• "设计满载状态" 英文翻译 :    designed full-load condition
• "实际满载状态" 英文翻译 :    actual full loaded condition
• "特性负载状态" 英文翻译 :    characteristic load conditions
• "满载状态下的高度" 英文翻译 :    laden height

• You don t have to preserve and load state every time you return to the user for more information
  不必在每次返回用户以获取更多信息时都保存和加载状态。
• Method , and there are three types of deserialization errors that can occur as the state is being loaded
  方法，并且在加载状态时可能发生三种类型的反序列化错误。
• The default application domain , which must remain loaded throughout the lifetime of the application
  默认的应用程序域，该域在应用程序的整个生命周期内必须保持加载状态
• Notifies all registered advisory sinks that the object has changed from the running state to the loaded state
  向所有已注册的通知接收器通知以下情况：对象已从运行状态更改为加载状态。
• Optional specifies the add - in s preloaded state , that is , whether or not the add - in should create its user interface by using a method such as
  （可选）指定外接程序的预加载状态，即外接程序是否应该使用一种方法（如
• Notification indicates that an object is making the transition from the running state to the loaded state , so its container can take appropriate measures to ensure orderly shutdown
  通知指示对象正在从运行状态向加载状态过渡，所以它的容器可以采取相应的措施来确保实现有序关闭。
• The residue contact pressure will be decreased after temperature cycle , the higher the working temperature , the lower the residue contact pressure , which has been proved by experiment
  研究表明，当复合管处于热加载状态时，复合管存在着极限工作温度；经过极限温度循环后，残余接触压力将减小，且极限温度越高，残余接触压力值越小；通过实验得到了验证。
• Based on the analysis of designed cad graphics and the given parameters , computer can convert the cad graphics to a acdbpolyline which can simulate the routine of the conveyor chain . then by using the method of point - by - point strain calculation , computer could figure out each point ’ s strain of the chains under different load states , and get the results such as strain ’ s maximal and the minimal values and their positions , weight of the strain equipment and power of the drive electric - machinery that the conveyor need
  通过对设计的cad图形和给定参数的分析,将输送链运行轨迹转化为一条可模拟输送链轨迹的多义线,然后用逐点张力计算法动态地计算出各种加载状态下输送链上各点的受力,得出最大、最小受力点的力的大小和位置,拉紧装置的重量,驱动电机所需的功率等结果。