单剪的英文

• simple shear
• simpleshear
• single shear
• single sheaved block

• "单"英文翻译    singular number fate; destin ...
• "剪"英文翻译    scissors; shears; clippers a ...
• "单剪机" 英文翻译 :    unishear
• "单剪仪" 英文翻译 :    simple shear apparatus
• "动单剪" 英文翻译 :    dynamic simple shear
• "单剪接合" 英文翻译 :    single shear joint; single-shear joint
• "单剪力铆钉" 英文翻译 :    rivet in single shear
• "单剪连接" 英文翻译 :    single shear rivet; single-shear joint
• "单剪螺栓" 英文翻译 :    bolt in single shear; single-shear bolt
• "单剪铆钉" 英文翻译 :    rivet in single shear; single shear rivet; single-shear rivet
• "单剪铆接" 英文翻译 :    single shear single rivet joint; single shears; single-shear rivet joint
• "单剪切铆钉" 英文翻译 :    rivet in single shear
• "简单剪流切" 英文翻译 :    simple shearing flow; simpleshearingflow
• "简单剪切" 英文翻译 :    simple shear
• "单剪单行铆接" 英文翻译 :    single-shear single rivet joint
• "单剪双行铆接" 英文翻译 :    single shear double rivet joint; single-shear double rivet joint
• "振动单剪试验" 英文翻译 :    dynamic simple shear test
• "直接单剪试验" 英文翻译 :    direct simple shear test
• "周期单剪试验" 英文翻译 :    cyclic simple shear test
• "室内土工试验单剪仪" 英文翻译 :    simple shear apparatus
• "室内土工试验振动单剪试验" 英文翻译 :    dynamic simple shear test
• "室内土工试验直接单剪试验" 英文翻译 :    direct simple shear test
• "单简" 英文翻译 :    single shear
• "单碱的" 英文翻译 :    monobasic
• "单检校正液压机" 英文翻译 :    single conpensate hydraulic press
• "单检波器地震道" 英文翻译 :    single seismometer trace

• Dynamic simple shear test
  室内土工试验振动单剪试验
• Direct simple shear test
  室内土工试验直接单剪试验
• Simple shear apparatus
  室内土工试验单剪仪
• Aerospace ; rivet design values static load , for countersunk rivet joints , single shear ; rivet materials 3 . 1124 and 3 . 1324
  航空航天.单剪沉头铆钉连接用静载荷铆钉设计值.第1部
• Each virtual simple shear mechanism is simulated by boundary surface plasticity model in the virtual stress and strain space
  其中最明显的是位于与实际单剪方向一致的虚拟单剪机构。
• By the use of a soil cyclic simple testing system firstly , which is inputted into our country very newly , cyclic simple shear tests of each layer soil are performed , and the dynamic characteristics of them are obtained
  并首次运用最新引进的循环单剪系统,对场地内各层土分别进行循环单剪试验,确定了场地各土层的动力特性指标。
• Field tests and laboratory tests are performed , and the difference of results is researched comparatively . cyclic simple shear test and dynamic triaxial test are performed too , and the difference between them is obtained
  同时研究室内动三轴试验和循环单剪试验所确定的土动力参数,并比较了它们的差异,分析了试验结果差异的原因。
• In this thesis , a series of single and double - direction - load tests are carried on the single plate framing connection between truss - steel beam and concrete wall often used in tall - building . by single - direction - load tests , the flexure capacity of the joints in use of different design is researched in particular , the effect of bolt design on the flexure capability is analysised ; based on the cyclic loading experiment , such characteristics of the anchors are analyzed - . bearing capacity . rigidity , ductility , hystersity capacity , energy dissipation and failure phenomena
  通过单向静力试验，研究了单剪板连接的不同设计对钢架梁的约束能力的变化，重点讨论了螺栓的设计对约束能力的影响；通过周期性反复加载试验研究了不同设计的单剪板连接预埋件的抗震性能的不同，重点分析了结构的承载能力、刚度、延性、滞回性能、耗能能力及其破坏特征等。
• In the flexure capacity research , the going specifications about the joint ' s design are different from the experimental conclusion , it is reasonable that better design solution is applied on design ; in the research of anchors , there is a large of effects on the aseismic behavior of anchor when different designs are carried on , so , the choice of design solution is very important . or else , the thought , the theory and formula applied by designers is failed
  对单剪板连接预埋件的研究表明：不同的单剪板节点的设计方案对节点的抗震性能有很大的影响，必须重视设计方案的选择，以及设计方案的构造处理，否则设计公式、理论的应用可能是盲目的，设计工作者的预期目的也不能达到。通过这一系列的研究对单剪板连接的设计提出改进的方向，对单剪板连接预埋件的设计提出可供参考的建议，并且为以后的研究者提出努力的方向。