参考电流的英文

• reference current

• "参考"英文翻译    consult; refer to; read sth. ...
• "电流"英文翻译    electric current
• "参考电报" 英文翻译 :    reference electrode
• "参考电极" 英文翻译 :    reference electrode
• "参考电路" 英文翻译 :    reference circuit
• "参考电平" 英文翻译 :    reference level
• "参考电平低" 英文翻译 :    xdb
• "参考电位" 英文翻译 :    reference potential
• "参考电压" 英文翻译 :    interference voltage; reference voltage; vref voltage reference
• "参考电压源" 英文翻译 :    reference element; reference voltage source
• "参考电源" 英文翻译 :    reference power supply; reference power-supply; reference supply; vref
• "参考电站" 英文翻译 :    reference power plant
• "零参考电平" 英文翻译 :    zero reference level
• "内参考电极" 英文翻译 :    internal reference electrode
• "白色参考电平" 英文翻译 :    white reference level
• "参考电话功率" 英文翻译 :    reference telephonic power
• "参考电压电平" 英文翻译 :    reference voltage level
• "甘汞参考电极" 英文翻译 :    calomel reference electrode
• "功控参考电平" 英文翻译 :    pwrlel power level
• "假设参考电路" 英文翻译 :    hypothetical reference circuit
• "零参考电平点" 英文翻译 :    zero reference point
• "零位参考电平" 英文翻译 :    zero reference level
• "微型参考电极" 英文翻译 :    microreference electrode
• "参考级参考电平" 英文翻译 :    reference level
• "标准电话参考电路" 英文翻译 :    standard reference telephone circuit

• Simulation results show that this scheme is able to achieve both the satisfactory steady state performance and fast dynamic response when plant parameters vary
  仿真结果表明，定子电流在参数变化时能够实现对参考电流的快速跟踪，同时能获得良好的稳态性能。
• To be mentioned that the bandgap reference current source is vital for the op amps to improve its performance , and it did n ' t affect the circuits " power disspation too much
  还值得一提的一点是，应用cmos工艺所设计的带隙参考电流源对电路性能的提高具有重要的作用。
• In this thesis , analysed and designed the architecture of the new type cmos rail - to - rail operational amplifiers in detail , and successfully designed one of two stage compact cmos rail - to - rail amplifier and the cmos bandgap reference current source
  本次论文详尽地分析和研究了新型cmosrail - to - rail运算放大器的结构，完成了两级压缩式cmosrail - to - rail运算放大器和cmos带隙参考电流源电路的设计。
• Specifically analysed and presented the common - mode differential input stage , linear transconductance control circuit of input stage , current sum circuit , floating ab - class control output stage , the bias circuit of op amps and the bandgap reference current source circuit
  具体对运放的共模差分输入级、输入级线性跨导控制电路、电流和电路、浮动ab类输出级电路、运放的偏置电路和带隙参考电流源电路进行分析设计。
• The dynamic model of asvg is established , which is regard as bases of transforming the reference currents to the reference voltage . principle of selecting main model parameters is discussed . based on the ip - iq method , the reference current signals are detected from load currents
  本文建立了四桥臂asvg的动态模型，以此作为参考电流转化为参考电压的依据；讨论了模型主要参数的选取原则；确定了以ip - iq法作为参考电流的检测方法。
• For the bldcm which has a neither sinusoidal nor trapezoidal back - emf , that is , for a general shape back - emf bldcm , this dissertation proposes a novel id = 0 vector control method . by this method , the iq for a constant torque to produce is calculated through coordinate transformation , and the reference iq is tracked by vector control in the dq0 frame
  对于实际反电动势波形既非正弦又非梯形波的无刷直流电动机，提出一种新型的任意波形反电动势无刷直流电动机的i _ d = 0矢量控制方法，通过坐标变换浙江大学博士学位佑文摘要求解产生恒定电磁转矩所需的q轴电流，并在dqo坐标系下通过矢量控制对q轴参考电流进行跟踪。
• In the proposed technique the bemf waveform of bldcm need to be measured in advance at first , through computer simulation and frame transformation , the optimum q - axis current command is achieved . in order to minimize the torque ripple , the d and 0 - axis current command should be zero . furthermore , through reference frame transformation from dqo - axis to abc - axis , we can get the optimum current command in static abc reference frame
  在这种控制方法中首先测量出电机的实际反电动势波形，然后通过计算机拟合和坐标变换，求得产生恒定电磁转矩所需的q轴电流，令i _ d ~ * = i _ 0 ~ * = 0 ，通过坐标变换，得到三相静止坐标系a - b - c下的参考电流i _ a ~ * , i _ b ~ * , i _ c ~ * ，利用电流滞环控制来产生pwm信号，由于这种控制方法中电流不会突变，从而可以较好的抑制转矩脉动。