发泡法的英文

• foaming process

• "发泡"英文翻译    bleb; foam rise; foaming
• "法"英文翻译    law
• "化学发泡法" 英文翻译 :    chemical blowing process
• "挤出发泡法" 英文翻译 :    extrusion foaming method
• "熔体发泡法" 英文翻译 :    foam melt method
• "现场发泡法" 英文翻译 :    foam-in-place process; foamed-in-place process
• "一步发泡法" 英文翻译 :    one-shot method
• "杜罗默发泡法" 英文翻译 :    duromer foam process
• "发泡" 英文翻译 :    bleb; foam rise; foaming
• "捕泡法" 英文翻译 :    captive bubble method
• "浸泡法" 英文翻译 :    bath method; soaking method; steeping
• "气泡法" 英文翻译 :    gas bubble method; pressure bubble method
• "汽泡法" 英文翻译 :    bubble-tube method
• "氢泡法" 英文翻译 :    hydrogen bubble method; nydrogen bu le method; nydrogen bubble method
• "逐泡法" 英文翻译 :    drifting bubblemethod
• "肥皂泡法" 英文翻译 :    soap bubble method
• "空气气泡法" 英文翻译 :    air bubbling method
• "利克冲泡法" 英文翻译 :    turkish coffee; turkish lbrik coffee
• "气泡法探漏" 英文翻译 :    bubble method leak detection
• "现尝泡法" 英文翻译 :    foamed-in-place process
• "露头水浸泡法" 英文翻译 :    heat-out water immersion
• "石膏卷浸泡法" 英文翻译 :    plaster roll soaking method
• "发泡,起泡" 英文翻译 :    blowing up
• "发泡材" 英文翻译 :    polyurethane foam
• "发泡绸" 英文翻译 :    epispastic silk

• Extrusion foaming method
  挤出发泡法
• In the past few years , the pm method has been developed to fabricate metal foams . it can be used to produce foamed metals with excellent properties and complex geometry
  近年，粉体发泡法不但可制备出性能优良的泡沫金属，而且可制备出结构复杂的零部件。
• Therefore , the purpose of this thesis is to look for a suitable preparing process for 3 - tcp with their micro - construction controlled more easily and the porosity rate and strength uniform . this paper created a new preparing method of porous ceramics , i . e . foam gel - casting technique , which integrated foam technique in porous ceramics preparing and gel - casting technique in structural ceramics preparing was applied to improve the preparing technique of porous p - tcp bioceramics in order to prepare ceramics bodies with high body intensity , controllable porosity and easily machining performance
  因此，本论文努力寻求一种适合于- tcp多孔陶瓷的制备工艺，使其微观结构易于调节控制，空隙率和强度达到平衡同一。在实验中，结合了制备多孔陶瓷常用的发泡法和结构陶瓷制备中的注凝法，创新设计了一种新的多孔陶瓷成型方法? ?泡沫注凝法，对多孔- tcp生物陶瓷的成型工艺加以改进，制备出高强度、气孔率可控以及易加工的陶瓷坯体。
• In this paper closed - cell foam samples with basically controllable pore structure and uniform distributed pore were prepared by means of melt foaming technique ( mft ) . by relative theory analysis and adjusting the content of foam agent , foaming temperature , stirring time and hold time , means of getting samples with high quality has been found
  本文采用熔体发泡法，通过相关理论分析和控制发泡温度、搅拌时间、保温时间、调节发泡剂含量等制备出了孔结构基本可控、孔洞分布均匀的闭孔泡沫铝样品。

• 发泡法的日语：はっぽうこうてい はっぽうほう