同步驱动的英文

• synchronization driving
• synchronized drive

• "同步"英文翻译    synchronization; synchronism ...
• "驱动"英文翻译    drive; prime mover
• "同步驱动机" 英文翻译 :    synchrodrive
• "同步驱动器" 英文翻译 :    sync driver
• "同步驱动皮带" 英文翻译 :    synchronous belt
• "同步驱动皮轮" 英文翻译 :    synchronous belt pulley
• "一种同步驱动发电机" 英文翻译 :    motor-torque generator
• "异步驱动回路" 英文翻译 :    asynchronous drive circuit
• "驱动同步机" 英文翻译 :    driving synchro
• "主驱动同步机" 英文翻译 :    driving synchro
• "同步线路驱动器" 英文翻译 :    synchronous line driver
• "外同步复位驱动器" 英文翻译 :    reset driver for external synchronization
• "驱动" 英文翻译 :    [机械工程] drive; prime mover 前轮驱动 front-wheel drive; 四轮驱动 four-wheel drive; 气顶驱动 [油] gas-cap drive; 溶解气驱动 [油] dissolved-gas drive; 驱动齿轮 driving gear; 驱动电动机 drive motor; actuating motor; 驱动杆 drive rod; [工业] drive spindle; actuating arm; 驱动功率 driving power; 驱动力 thrust; driving power; driving force; 驱动轴 line axle; drive shaft; driving axle; driving shaft; 驱动装置 transmission; driving gear; driving device
• "同步" 英文翻译 :    synchronization; synchronism; cogradient; synchro 载波同步 carrier synchronization; 该影片画面与声音不同步。 the film does not synchronize with sound.; 同步齿轮 synchromesh gear; synchronizing gear; 同步电动机 synchro motor; 同步回旋加速器 frequency-modulated cyclotron; phasotron; [物理学] synchrocyclotron; cyclosynchrotron; 同步加速器 synchroaccelerator; synchronous accelerator; [物理学] synchrotron; 同步通信卫星 synchronous communication satellite; 同步卫星 geostationary satellite; synchronous [stationery] satellite; 同步卫星导航 synchronous satellite navigation; 同步增长 grow in step with; grow in phase with; grow in pace with
• "驱动，驱动机" 英文翻译 :    drive
• "驱动；驱动装置" 英文翻译 :    drive
• "同步；同步的" 英文翻译 :    synchronizing
• "同步同步机" 英文翻译 :    synchro
• "dbms驱动" 英文翻译 :    dbms drivers
• "d驱动" 英文翻译 :    d drive
• "侧驱动" 英文翻译 :    side drive
• "场驱动" 英文翻译 :    vd vertical drive; vd vetica dive
• "磁驱动" 英文翻译 :    magnetic drive
• "点驱动" 英文翻译 :    curves/points
• "电驱动" 英文翻译 :    electric drive impulsion electrica ,arranque electrico; electrical actuation; electrically driven; electricdrive

• Synchronous belt pulley
  同步驱动皮轮
• Zero - cross circuit makes sure output synchronism signals drive silicon control
  过零检测电路保证了输出信号零点同步驱动可控硅,降低电源污染。
• The set is synchronously driven by eleven acvector conversion motor , four part dance roller tension control
  本机十一个电机同步驱动，四段浮辊张力同步控制。
• And it conducts stepless speed change and synchronous movement of driving and rotating , controlled by the advanced electronic technique of frequency conversion
  在电气系统在先进的变频技术控制下，实现旋转平台无级调速和同步驱动旋转运动。
• Modular design is adopted in digital modulation system . in this way digital modulation system consist of vedio process module , synchronized drive module , semiconductor laser modulation and system control module
  数字化调制系统采用模块化设计方法，把系统分为四个功能模块，即视频信号处理、同步驱动、半导体激光调制和系统控制模块。
• Synchronized drive module produces horizontal drive signal in synchronization with horizontal synchronization signal and field drive sawtooth in synchronization with vertical synchronization signal . these signal drive scaning sytem of slltv
  同步驱动模块产生与行、场同步的行同步驱动信号和场锯齿波驱动信号，用于驱动激光电视的扫描系统。
• This paper gives the way of using the ac servo drive instead of the traditional drive mode consisted of the main motor , the gears and belts , realizing the synchronous drives of the multi - motors . the closed loop control technology of the speed and the position embedding has been adopted to track in real time , then to reduce the transmission error and the noise , so as to increase the control precision and the stability of the combination and simplify the maintenance and repair of the mechanical and technical system
  采用交流伺服驱动代替传统的由主电机、齿轮和皮带组成的传动方式,实现多电机同步驱动;采用速度环和位置环嵌套的闭环控制技术,进行实时跟踪,达到减小传动误差、减小噪音,增强机组的控制精度与稳定性、简化机电系统的维护与修理的效果。
• It can be used to grind straight line fiat edge , pencil edge , og edge , etc . it adopts synchronized belts two belts , two side holding and synchronized drive to transmit glass , the upper belt can be adjusted vertically according to the glass thickness , two groups of spindles are distributed symmetncally , it can grind two sides at the same time , one of the two groups of spindles is fixed while the other can move horizontally , spindles adjustment can be made in three directions vertical rise and fall , horizontal forward and backward
  可用于磨削直线平边圆边og边等采用同步皮带双带双侧夹持同步驱动传送玻璃。上带可根据加工玻璃厚薄作上下调整，两组唐头对称分布，平行双边同时磨削，两组磨头其中一组固定。另一组相对可作平行移动，磨头调整有三种运动垂直升降水平进退以及翻转。
• Moreover , the drivers of ccd with remote control , and the programs of interface , data acquisition , data processing and controlling , high speed laser scan system , signal receiving antenna are designed , which are debugged in the experiments . the test results of indoor experiment of the system are given
  研究了ccd的弱信号检测和空间目标的定位方法，研制了远程ccd同步驱动和高速数据采集的模块化系统，设计了高速光幕扫描系统、目标光斑信号广角接收系统、 ccd驱动及远程同步、高速信号及数据处理系统，并给出了系统的性能测试结果和对目标的室内高速模拟实验结果。