喷射特性的英文

• spray characteristic

• "喷射"英文翻译    spout; spurt; jet
• "特性"英文翻译    characteristic; character; p ...
• "燃油喷射特性" 英文翻译 :    fuel spray characteristic
• "发射特性" 英文翻译 :    ballistics; emission characteristic; launching characteristics; launching charcteristic; launchingcharcteristic
• "反射特性" 英文翻译 :    echo ing characteristics; echoing characteristic; reflected characteristics; reflection characteristic
• "放射特性" 英文翻译 :    emission characteristic; radioactive nature
• "辐射特性" 英文翻译 :    radiated characteristic; radiation characteristic
• "辐射特性图" 英文翻译 :    radiation characteristic pattern
• "角散射特性" 英文翻译 :    angular scattering property
• "漫射特性" 英文翻译 :    diffusive property
• "散射特性" 英文翻译 :    scattering property
• "双折射特性" 英文翻译 :    birefringent characteristic; birefringent characteristis
• "透射特性" 英文翻译 :    transmission curve; transmissison characteristic
• "弹道学；发射特性" 英文翻译 :    ballistics
• "地层透射特性" 英文翻译 :    earth transmission characteristics
• "二次发射特性" 英文翻译 :    secondary emission characteristic
• "二次放射特性" 英文翻译 :    secondary emission characteristic
• "发射特性曲线" 英文翻译 :    emission characteristic curve
• "反射特性曲线" 英文翻译 :    coverage diagram
• "方位反射特性" 英文翻译 :    directional reflection characteristic
• "飞行反射特性" 英文翻译 :    flight reflection characteristic
• "飞行辐射特性" 英文翻译 :    flight radiation characteristic
• "光谱反射特性" 英文翻译 :    spectral reflection characteristic
• "光谱透射特性" 英文翻译 :    spectral transmission characteristic
• "红外辐射特性" 英文翻译 :    infrared excess

• Oil pressure atomizing nozzles - determination of the angle and spray characteristics
  油压雾化喷嘴.角度和喷射特性的测定
• En299 oil pressure atomizing nozzles . determination of the angle and spray characteristics
  油压自动喷嘴.角度和喷射特性的测定
• A new high speed and great flow solenoid valve , one of the key parts of electronically controlled fuel injection , is assembled , adjusted , which makes it in good condition , and prepares for injection test in this thesis
  电磁阀作为电控燃油系统中极为关键的部件，它对燃油喷射特性影响特别大。故本文对课题组自行开发、研制的高速大流量电磁阀进行了装配、调试，使其液力状况最佳，为喷油实验作前期的准备工作。
• The experimental investigations were first conducted on diesel spray wall - impingement mixing process with or without a bump on a flat wall and in a combustion chamber by means of plif method in the self - made constant volume combustion spray simulation set - up which can reproduce the typical working conditions and high - pressure fuel injection of modern diesel engines . the simulation computation of a cfd code about them was then carried out
  首先在自行研制的、可以模拟现代柴油机典型工作环境及高压燃油喷射特性的定容燃烧喷雾模拟装置上用片状激光诱导荧光法（ plif ）对平壁上、燃烧室内不设置和设置bump的柴油喷雾撞壁混合过程进行了试验研究，然后又用cfd多维数值分析软件对其进行了模拟计算。