回转半径的英文

• circling radius
• gyration radius
• gyroradius
• radius gyration
• radius of gyration
• radius of turning circle
• turn radius
• turning radius
• turningradius

• "回转半径29" 英文翻译 :    m the working radius is 29m
• "前回转半径" 英文翻译 :    front fitting radius
• "附加回转半径" 英文翻译 :    added turning radius
• "截面回转半径" 英文翻译 :    radius of gyration
• "均方回转半径" 英文翻译 :    mean square radius of gyration
• "稳定回转半径" 英文翻译 :    steady turning radius
• "最小回转半径" 英文翻译 :    least radius of gyration
• "惯性半径；回转半径" 英文翻译 :    radius of gyration
• "回转半径，回旋半径" 英文翻译 :    radius of gyration
• "半挂车前回转半径" 英文翻译 :    front fitting radius of semi trailer; rear tractor clearance radius of semi-trailer
• "飞机俯仰回转半径" 英文翻译 :    radius of gyration of aircraft in pitch
• "回转半径指示器" 英文翻译 :    turning radius indicator
• "水平面回转半径" 英文翻译 :    train radius
• "潜望镜最大回转半径" 英文翻译 :    maximum rotation radius of periscope
• "共转半径" 英文翻译 :    corotationradius
• "扭转半径" 英文翻译 :    radius of torsion; torsion radius
• "旋转半径" 英文翻译 :    radius of gyration; radius of rotation; radius of turn; rotation radius; swinging radius; turning radius; turningradius
• "漩转半径" 英文翻译 :    twirl radius
• "后部旋转半径" 英文翻译 :    tail radius of crane
• "滑降弯转半径" 英文翻译 :    radius of action
• "均方旋转半径" 英文翻译 :    mean square radius of gyration
• "平均旋转半径" 英文翻译 :    average radius of gyration
• "后部旋转半径 起重机后部旋转半径" 英文翻译 :    tailradiusofcrane
• "回转圆半径" 英文翻译 :    radius of the turning circle
• "回转拌和机" 英文翻译 :    gyro mixer; gyro-mixer
• "回转板洗矿机" 英文翻译 :    longdal log washer

• Rated capacity , rated speeds and slewing radius of cranes
  起重机额定功率额定速度及回转半径
• Front fitting radius of semi trailer
  半挂车前回转半径
• In crane choosing , three parameters should be taken into consideration : payload capacity ( q ) , lifting height ( h ) and working radius ( r ) . and three parameters should meet design requirements at the same time
  选择起重机的型号原则是所选起重机的三个工作参数，即起重量q ，起重高度h和工作幅度（回转半径） r均需要满足班组结构吊装要求。
• The heavy - duty slewing crane is suitable for the material swinging operation in metallurgy , railway , quay , machinery manufacture , etc . this hoist adopts the structure of rotary fulcrum bearing and variable cross - section . the overweight height is up to 2 . 5 - 2 . 6 meters , and rotary radius is up to 7 - 12 meters
  重型旋臂型起重机适用于冶金铁路码头机械制造等行业的物料吊运作业，该机采用了回转支承与半截面壁结构，超重高度达2 .米，回转半径达米。
• In the wafer - cycle fitting algorithm , comparing with circumgyration radius approach , track fitting approach , and least square circle fitting approach . in the wafer pre - alignment system , the wafer square fitting algorithm - least square circle fitting approach , based on optical linear ccd sensor , as well as the theoretical error analyze of this algorithm
  在晶圆检测算法方面,比较回转半径法、轨迹拟合法以及最小二乘圆法,选择光学线阵ccd的晶圆圆心最小二乘圆法作为系统晶圆圆心的检测方法。

• 回转半径的日语：ターニングラジアス はんけい かいてんはんけい せんかいはんけい