固溶处理的英文

• solution heat treatment
• solution treatment

• "固"英文翻译    firm; hard; solid
• "溶"英文翻译    dissolve
• "处理"英文翻译    deal or cope with
• "【冶金】固溶处理法。" 英文翻译 :    solution treatment
• "固溶处理钢丝" 英文翻译 :    solution treatment wire
• "固溶处理合金" 英文翻译 :    solution treated alloy
• "固溶处理温度" 英文翻译 :    solution treatment temperature
• "增溶处理法" 英文翻译 :    solutizer process
• "固溶化处理" 英文翻译 :    solid solution treatment; solution treatment
• "固溶热处理" 英文翻译 :    solid solution heat treatment; solid solution treatment; solution heat-treatment
• "固溶化热处理" 英文翻译 :    solution treatment; spheroidizing
• "固溶热处理状态" 英文翻译 :    solution heat treated condition
• "固溶" 英文翻译 :    quench annealing; solid solution
• "固溶后的时效硬化处理" 英文翻译 :    quench aging
• "水冷韧化处理(高锰钢, 不锈钢), 固溶化淬火" 英文翻译 :    quenching-in water
• "固溶度" 英文翻译 :    solid solubility
• "固溶化" 英文翻译 :    solutionizing
• "固溶胶" 英文翻译 :    solid sol
• "固溶体" 英文翻译 :    alpha solid solution; delta solid solution; gamma solid solution; mischcrystal; mischief; mixcrystal; mixed crystal; solid dolution; solidsolution; sosoloid
• "固溶物" 英文翻译 :    dissolved solid matter
• "固溶线" 英文翻译 :    liquidoid
• "固溶相" 英文翻译 :    solid solution phase
• "阿伐固溶体" 英文翻译 :    alpha solid solution; alpha(α)solid solution; alphasolid solution
• "饱和固溶体" 英文翻译 :    saturated solid solution
• "部分固溶体" 英文翻译 :    partial solid solution

• Influence of strengthened solution on microstructures of 7075 aluminum alloy
  强化固溶处理对7075铝合金组织的影响
• Effects of solution heat treatment on microstructure in a high purity 7055 aluminum alloy
  固溶处理对高纯7055铝合金组织的影响
• Effects of the solution cooling rate on the corrosion resistance of 1420 al - li alloy
  固溶处理冷却速度对1420铝锂合金抗蚀性能的影响
• Study effects of solution treatment on microstructures and properties of 2014 aluminium alloy
  固溶处理对2014铝合金组织和性能的影响
• Effect of heat - treatment on the structure and properties of chemical plated ni - sn - p coating
  电场固溶处理对1420铝锂合金组织和性能的影响
• Effect of solution treatment in an electric field on micr ostructure and properties of 1420 al - li alloy
  固溶处理冷却速度对1420合金性能的影响
• Effect of solution treatment on microstructure and properties of high - purity and high - strength aluminum alloy
  固溶处理对高纯高强铝合金组织和性能的影响
• Ht sub - factory : complete process of annealing , quenching , tempering , quenching and tempering , solution treatment etc
  热处理厂：可完成退火,正火,回火，调质,固溶处理等工艺
• The foundry and heat treatment processes have been explored in order to improve properties of stainless steel . the method of solution heat treatment at high temperature with cooling controlled has been put forward
  为了全面改善cr30mo铁素体不锈钢的性能，充分发挥不锈钢的微合金化作用，对于不锈钢的热处理工艺进行探讨，提出高温固溶处理，控制冷却措施。
• Zircaloy - 4 sheet , which was cold - worked followed by recrystallization annealing , exhibits longer lcf life in the rolling direction than that in the transverse direction , and the fact that difference in lcf life between both directions becomes larger as the range of plastic strain becomes lower can be attributed to the texture effect , p - solution treatment deteriorates the alloy ' s lcf property because the treatment lowers the average value of alloy ' s schmid factors , and the subsequent annealing - treatment in a - phase range has a impact on the lcf properties , i . e . the subsequent annealing - treatment at 500 ? for 1 . 5h results in better property than that at 750 for 1 . 5h , which comes mainly from the fact that the alloy annealled at 500 for 1 . 5h has lower amount of the precipitate particles than the alloy annealled at 750 for 1 . 5h
  对于冷加工后经再结晶退火处理的zr - 4合金，轧制方向的低周疲劳寿命比横向要大。随着_ p的降低，两个方向的低周疲劳寿命的差别相应增加，这是由于合金中存在织构的缘故。冷加工后经再结晶退火处理的zr - 4合金在固溶处理后，抗疲劳性能明显降低，这主要是由于固溶处理降低了合金的schmid因子；固溶处理后在相区的退火对疲劳性能有影响，即500 1 . 5h退火的抗疲劳性能要优于750 1 . 5h退火，这主要与500 1 . 5h退火的合金中沉淀相粒子的数量较少有关。

• 固溶处理的日语：ようたいかしょり