均布载的英文

• uni form loading

• "均"英文翻译    equal; even
• "布"英文翻译    I cloth; textile
• "载"英文翻译    load; carry; hold
• "不均布载荷" 英文翻译 :    irregularly distributed load
• "非均布载荷" 英文翻译 :    non-uniform load; uneven load
• "均布载荷" 英文翻译 :    even load; even-distributed load; uniform distributed load; uniform load; uniformload; uniformly distributed load; uniformly-distributed load
• "等效均布载荷" 英文翻译 :    equivalent uniform load
• "跨度上均布载重" 英文翻译 :    load uniformly distributed over span; loaduniformlydistributedoverspan
• "均布" 英文翻译 :    equispaced; uniform distribution
• "均布的" 英文翻译 :    uniformly distributed
• "均布尔" 英文翻译 :    cunbur
• "均布辊" 英文翻译 :    distributing roller; evening roll
• "均布克" 英文翻译 :    junbuk
• "均布碛" 英文翻译 :    sheet drift
• "分布载荷" 英文翻译 :    distributed load; distribution load
• "均匀分布载荷" 英文翻译 :    continuous load; uniformly distributed load
• "非均布应力" 英文翻译 :    non-uniform stress
• "分配[均布]螺旋" 英文翻译 :    delivery auger; distributing auger
• "弧线均布" 英文翻译 :    hxbz
• "均布动荷载" 英文翻译 :    moving uniform load; uniform live load
• "均布动载荷" 英文翻译 :    moving uniform load
• "均布负载" 英文翻译 :    even load; uniform load; uniformly distributed load
• "均布荷载" 英文翻译 :    area load; even load; evenly distributed load; uniform loading; uniformly distributed load
• "均布孔喷头" 英文翻译 :    repetitive-pattern injector
• "均布力发射" 英文翻译 :    uniform load discharge

• Firstly the method of rayleigh - ritz and galerkin were adopted to analyze the beams under loading combined antisymmetric end moments with transverse uniformly distributed load theoretically , and the results were compared with that offered by kirby , p . a and nethercot , d . a , it showed that result was approximate and even lower and so to some extent the approach used in the paper is practice . secondly several principal factors that affect the beam stability were analyzed respectively , especially the shortening effect was mentioned scarely in some literature so far . at last , the author adopted the matlab to program the finite element software to analyze numerically , the results derived from it were agreed well with it
  本文分别采用了rayleigh - ritz法和galerkin法从理论上分析了反对称端弯矩及横向均布载共同作用下梁的等效弯矩系数，并与kirby , p . a和nethercot , d . a分析结果进行对比，结果表明本文采用的方法得出的等效弯矩系数与其得出结果比较，在均布荷载与端弯矩比例相差不大时基本接近或偏小，说明此方法是可行的，而当均布荷载与端弯矩比例较大时，应根据均布荷载作用进行弯矩等效方法来计算。