壁粗糙度的英文

• wall roughness

• "壁"英文翻译    wall
• "粗糙度"英文翻译    harshness; roughness; rugosi ...
• "管壁粗糙度" 英文翻译 :    pipe roughness
• "孔壁粗糙" 英文翻译 :    roughtness
• "粗糙度" 英文翻译 :    harshness; roughness; rugosity; coarseness; degree of roughness; roughness concentration
• "壁面粗糙度" 英文翻译 :    wall roughness
• "表面粗糙度" 英文翻译 :    finish; pimple; roughne of the surface; roughness of surface; roughness of the surface; surface a erities; surface asperities; surface roughness factor; surfaceness
• "冰粗糙度" 英文翻译 :    ice roughness
• "层粗糙度" 英文翻译 :    bed roughness; bedroughne
• "粗糙度；凸起" 英文翻译 :    pimpling
• "粗糙度比" 英文翻译 :    roughness ratio
• "粗糙度标度" 英文翻译 :    scale of roughness
• "粗糙度表" 英文翻译 :    roughness meter
• "粗糙度参数" 英文翻译 :    roughness parameter
• "粗糙度测量" 英文翻译 :    roughness measurement
• "粗糙度超标" 英文翻译 :    pps high ucl
• "粗糙度峰值" 英文翻译 :    roughness; rugosity
• "粗糙度符号" 英文翻译 :    finish mark
• "粗糙度高度" 英文翻译 :    height of roughness; roughness height
• "粗糙度计" 英文翻译 :    roughmeter
• "粗糙度结构" 英文翻译 :    roughness pattern
• "粗糙度宽度" 英文翻译 :    roughness width
• "粗糙度谱" 英文翻译 :    roughness spectrum
• "粗糙度系数" 英文翻译 :    coefficient of roughness; coefficient of rugosity; roughne coefficient; roughness coefficient; roughness factor; roughness value
• "粗糙度效应" 英文翻译 :    roughness effect

• Influence of etching parameters on sidewall roughness of silicon based waveguide etched by inductively coupled plasma
  脊形波导侧壁粗糙度的影响
• As the sample - chamber is an critical part of a microfluidic chip , its roughness has an direct influence on the sampling
  进样储液池是芯片微通道的重要结构之一,其侧壁粗糙度是直接影响进样效果的重要技术指标。
• On the bases of theoretical studies , many technical methods are applied to research the influence of different factors on the roughness of sidewalls
  根据理论分析,在工艺上采用了多种途径,揭示激光加工过程中各种因素对侧壁粗糙度的影响。
• Finally , the roughness of sidewalls is reduced greatly by rising the temperature , which results in more effective discharging of air bulbs in the melted surface
  再一方面,通过升高材料温度的方法,有助于激光加工过程中侧壁熔化层内气泡的有效析出,可以大幅降低侧壁粗糙度。
• Aiming at reducing the roughness of the sidewalls in the manufacturing of the pmma liquid pool by co _ 2 lasers , in the hypothesis that the intensity of the laser has a guassian distribution , the temperature distribution in slab material with limited thickness is studied according to traditional thermal conductive formulas , and the condensing progress of the melted surface of sidewalls is researched . it is concluded from the discussion of temperature distribution that the air bulbs is the major reason for the roughness of the sidewalls
  为降低co _ 2激光加工pmma材料储液池侧壁粗糙度,本文根据传统的热传导方程,假定激光强度为高斯分布,对有限厚板状材料的温度场进行分析;并考察侧壁表面熔化层凝固过程的特征;结果表明,侧壁粗糙度形成的主要原因在于侧壁表面熔化层凝固前气泡未及时析出。