复位电路的英文

• reset circuit rsc

• "复位"英文翻译    reset; resetting; restoratio ...
• "电路"英文翻译    circuit; electric circuit; e ...
• "双门复位电路" 英文翻译 :    dual gate reset circuit
• "复位电极" 英文翻译 :    reset electrode
• "复位电门" 英文翻译 :    reset switch
• "“软”箝位电路" 英文翻译 :    soft clamp circuit
• "定位电路" 英文翻译 :    positioning circuit
• "二进位电路" 英文翻译 :    binary circuit; binarycircuit
• "鉴相位电路" 英文翻译 :    discriminator circuit
• "进位电路" 英文翻译 :    carry circuit; carry-circuit
• "钳位电路" 英文翻译 :    circuitry, clamping; cladding circuit; clamper; clamping circuitry
• "数位电路" 英文翻译 :    digit circuit; digital circuit; digital electronics
• "移位电路" 英文翻译 :    shift circuit
• "置位电路" 英文翻译 :    setting circuit
• "箝位电路" 英文翻译 :    clamp circuit; clamper circuit; clamping circuit; lamper
• "贝克箝位电路" 英文翻译 :    baker clamping circuit
• "电话同位电路" 英文翻译 :    telephone coordinating circuit
• "反馈钳位电路" 英文翻译 :    feedback-clamp circuit
• "反馈箝位电路" 英文翻译 :    feed back-clamp circuit; feedback clamp circuit; feedback-clamcircuit
• "高速进位电路" 英文翻译 :    high-speed carry circuit
• "计数置位电路" 英文翻译 :    count digit set chain
• "键控箝位电路" 英文翻译 :    keyed clamp circuit
• "进位电路延迟" 英文翻译 :    ripple delay
• "开关钳位电路" 英文翻译 :    switching clamper
• "平衡钳位电路" 英文翻译 :    balanced clamper

• Abstract : trigger circuit , power supply circuit , clocking circuit and reset circuit are the main circuits on the main board
  摘要：触发电路、供电电路、时钟电路、复位电路是主板上最主要的电路。
• The main goal of this dissertation is to present a design of the analog ip . called lvdrcset and the soc integration of line
  论文第四章着重论述了一个重要的模拟ip ? ?低电压检测复位电路( lvdreset )的设计。
• The part of communication card development is mainly composed of the design of reset circuit , the implement and control of sharing ram , the assignation of address and the design of eprom program
  通信卡研制部分的主要内容包括复位电路的设计，共享ram的实现与控制，地址空间的分配以及板上eprom程序设计等。
• The design of this asic ( application specific integrated circuit ) is more advanced in power consumption , clock & calendar circuit and reset circuit making it more competitive than similar domestic products
  该驱动电路asic的设计在功耗、时钟日历电路、复位电路等方面较国内同类产品有明显改进，使得该芯片在市场竞争上将具有较大优势。
• The test system including power circuit , restoration circuit , pulse circuit , the circuit of the memory ( sram and flash ) , jtag interface circuit , the control circuit of the touch - panel , lcd interface circuit
  该测试系统的功能模块包括电源电路,复位电路,晶振电路,存储器电路( sram和flash ) , jtag接口电路,触摸屏控制电路, lcd接口电路。
• The control system of auto lensmeter is designed , including the drive circuit and restoration circuit of step - motor . the corresponding software is designed and debugged for step - motor based on the control principle of dsp
  对全自动数字查片仪的控制系统进行了设计,包括步进电动机的驱动电路和复位电路,并根据dsp控制原理设计了相应的驱动程序。
• The hardware system includes power supply circuit , clock reset circuit , jtag model building circuit , decoding circuit , memory interface circuit , man - machine interface circuit and numeric control constant - current source interface circuit
  硬件系统主要包括电源电路、时钟复位电路、 jtag仿真接口电路，译码电路、存储器接口电路、人机接口电路、 adc转换电路和数控恒流源接口等。
• Based on the requirements of the system the power source , amplify circuits , data gathering and storage circuit and reset circuit were designed . the software of this system was programmed with c language of mcs - - 51 single chip microcomputer that is a language of structijral programming language , cofltains many " characters of advanced ianguages and has the functions of assemble 1anguage . the software of the system was designed with structural program module that make the sttucture of software clear and convenience debug and modify
  其中系统硬件设计主要是采用mcs ? 51单片机为肌肉嫩度测量仪的核心，进行了系统电源设计、放大电路设计、数据采集和存储电路设计、复位电路设计；软件设计使用单片机c ? 51语言，它是一种结构程序设计语言，兼顾了多种高级语言的特点，并具备汇编语言的功能，根据程序设计原理，采用结构化程序设计，使软件结构清晰。
• This paper sums the situations and trends of domestic and international engineering machinery firstly , discusses the demands and implements of intelligent and long - range monitoring and controlling , and constructs a three - layer model of the engineering machinery long - range monitorin and control system : the front unit control systems , the machine - mounted monitoring system and the long - range control center ; proposes a kind of structure of embedded system based on c / os - ; dissects the characteristics , structure , operation and schedule principle of c / os - , modified the kernel , and improves dependability of the schedule algorithm ; designs the hardware in detail : the microprocessor at91rm9200 , the store unit , the serial interface , the human - computer interaction interface , the can bus control module , the debug interface and the reset circuit etc . ; on this basis , succeeds in transplanting c / os - to the system , sets up the operating system framework , designs the driver , sets up the institutional framework of upper user ' s application , provides the method and concrete application process of the graphical user interface module based on c / os - . the system designed in this paper , not only has the functions of local control , friendly human - computer interface , but also has various interfaces which make the system can be managed by the long - rang center
  本文首先综述了国内外工程机械行业发展的现状和趋势,阐明了实施工程机械智能化及远程监控的意义和需求,并为此构建了工程机械远程监控系统三层结构模型:前端单元控制系统、车载监控系统和远程监控中心;提出了一种基于c / os -的嵌入式车载监控系统构建方案;深刻剖析了c / os -的特点、内核结构、运作机理、调度算法,在此基础上对其内核进行移植前的必要修改,并对其调度算法进行了可靠性改进;对构成嵌入式系统硬件的各个主要部分:嵌入式微处理器at91rm9200 、存储单元、串行接口、人机交互接口、 can总线控制模块、调试接口以及复位电路等做了详细的设计;在此基础上,成功地将c / os -实时内核移植到本文研发的嵌入式硬件系统中,建立了车载监控系统的操作系统体系结构,编写了该操作系统的底层硬件驱动程序,建立了上层用户应用程序的组织结构,并给出了图形用户界面模块化应用程序在c / os -操作系统上的建立方法和具体应用过程。
• In the main board design we emphasize the function blocks which are tightly related to the modularized router interface , so we give the description of those function blocks design such as cpu block design , reset block design , clock block design , debug block design and memory block design
  我们对主板设计的目的是完成维护路由器自身运转的功能，着重叙述以mpc860t为核心的主板上的对接口有影响的功能模块的设计。基于这个出发点，我们将主板设计分为cpu模块设计、复位电路模块设计、时钟电路模块设计、调试电路模块设计、存储器电路模块设计，并分别进行了阐述。