层间隙的英文

• lamellar spacing

• "层"英文翻译    I storey; tier; stratum
• "间隙"英文翻译    interval; gap; freedom; spac ...
• "熔岩层间隙" 英文翻译 :    bedding voids
• "巩膜浅层间隙,巩膜上间隙" 英文翻译 :    episcleral spaces
• "层间" 英文翻译 :    interbedding; interlaminar; interlamination; interlayer; interpass temperature
• "滋养层间隙,绒毛间腔隙,滋养层腔隙" 英文翻译 :    trophoblastic lacuna
• "间隙" 英文翻译 :    (空隙) interval; gap; freedom; space; [机械工程] clearance; separation; stricture; clear; interspace; allowance; play; backlash; bottom clearance; cross gap; free distance; gapping place; spatium; yawn; [物理学] interstice 齿轮间隙 gear clearance; 利用工作间隙学习 study in the intervals of one's work; 两场战争的间隙 an interval between two wars; 在行与行之间要留出间隙, 以便作必要的修改。 please leave a space between the lines for the necessary corrections
• "层间的" 英文翻译 :    interbedded; interbeded; interformational; interjacent; interlamellar; interstratified
• "层间钾" 英文翻译 :    interlayer potassium
• "层间距" 英文翻译 :    interlamellar spacing; interlayer spacing; the distance between the two crystal layer, layer distance; the distance between the two crystal layer， layer distance
• "层间流" 英文翻译 :    interflow
• "层间脉" 英文翻译 :    interfoliated vein
• "层间水" 英文翻译 :    interlayer water; intermediary water; intermediate water; interstratum water; middle water
• "中层间" 英文翻译 :    intermediate belt
• "板层间内障" 英文翻译 :    lamellar cataract
• "板间的, 层间的" 英文翻译 :    interlaminar
• "层间剥离" 英文翻译 :    scaling
• "层间壁墙" 英文翻译 :    kneeling figure; knick point
• "层间变形角" 英文翻译 :    inter-story deflection angle
• "层间表面" 英文翻译 :    interlayer surface
• "层间不冻层" 英文翻译 :    talik
• "层间不整合" 英文翻译 :    interformational unconformity
• "层间传导" 英文翻译 :    layer-to-layer transfer
• "层间窜流" 英文翻译 :    communication between zones; interzonal cross-flow; layer cross flow
• "层间窜通" 英文翻译 :    inter-zone commununation

• The main results are : grinding is favorable to improve surface smooth degree , while nitrided and slow deposition makes sic granules fine ; the width of coatings gap increased in order of grinding , nitrided and vacuum heat treatment , but gap defects in multilayer coatings could be removed by slow deposition ; temperature of maximum weight loss could be decrease to 600 by grinding , vacuum heat treatment or slow deposition , but it will increased to 800 after nitrided ; oxidation kinetics curves all varied with the coating modifications
  主要有：磨削改性有利于提高涂层表面平整度，氮化和慢沉积使涂层表面颗粒细化。涂层间隙宽度按磨削改性、高温氮化、真空热处理依次增大，而慢沉积可获得无面缺陷的多层涂层。磨削改性、真空热处理及慢沉积均使最大氧化失重温度点提前至600 ，而高温氮化则使最大失重点后移至800 。