常温耐压强度的英文

• cold crushing strength

• "常温"英文翻译    normal atmospheric temperatu ...
• "耐"英文翻译    be able to bear or endure
• "压强"英文翻译    pressure; intensity of press ...
• "度"英文翻译    surmise; estimate
• "高温耐压强度" 英文翻译 :    crushing strength under high temperature
• "定形隔热耐火制品常温耐压强度试验方法" 英文翻译 :    shaped insulating refractory products-determination of cold crushing strength
• "耐压强度" 英文翻译 :    compression strength; compressive resistance; compressive strength; voltage withstand strength; withstand voltage strength
• "常温抗压强度" 英文翻译 :    ambient compressive strength
• "耐压强度试验" 英文翻译 :    voltage with stand test
• "高温耐压井" 英文翻译 :    hot pressurized well
• "炭素材料耐压强度测定方法" 英文翻译 :    carbon materials-determination of the compressive strength
• "耐温耐压电雷管" 英文翻译 :    high temperature-pressure resistant electric detonator
• "极限耐压强力" 英文翻译 :    ultimate compression strength
• "常温强度" 英文翻译 :    cold strength
• "波压强度" 英文翻译 :    intensity of wave pressure
• "层压强度" 英文翻译 :    laminating strength
• "承压强度" 英文翻译 :    bearing resistance; bearing strength
• "电压强度" 英文翻译 :    voltage strength
• "风压强度" 英文翻译 :    intensity of wind pressure
• "横压强度" 英文翻译 :    compression strength perpendicular to grain; crushing strength across the grain
• "环压强度" 英文翻译 :    ring crush compression resistance
• "挤压强度" 英文翻译 :    crushing strength; nip pressure
• "抗挤压强度" 英文翻译 :    crushing resistance
• "抗内压强度" 英文翻译 :    internal pressure strength
• "抗外压强度" 英文翻译 :    outer pressure resistance

• Shaped insulating refractory products - determination of cold crushing strength
  定形隔热耐火制品常温耐压强度试验方法
• Dense shaped refractory products - determination of cold compressive strength part2 : test with packing
  致密定形耐火制品常温耐压强度试验方法第2部分：衬垫试验法
• Dense , shaped refractory products - determination of cold compressive strength - part 1 : referee test without packing
  致密定形耐火制品常温耐压强度试验方法无衬垫仲裁试验
• Results show that : ( 1 ) for each particle size of andalusite , variation tendency of the properties of the material is generally the same : the maximum of bulk density , compressive strength and rupture strength appears in the range of 5 % - 10 % content of fiber , these properties of the material remarkably decrease as the fiber content exceed 10 % ; while at the same fiber content , the properties of the material increase with the increase of firing temperature
  结果表明： ( 1 )对于不同粒度的原料，性能变化规律大致相同：在同一烧成温度下，体积密度、常温耐压强度、常温抗折强度在5 10之间出现峰值，加入量超过10之后材料的性能明显下降；在相同的纤维含量下，随着烧成温度的提高，试样的各项性能均有所上升。
• We tested the ambient temperature compressive strength , the ambient temperature bending strength , volume density and the porosity of the sintered composites . by means of the om , sem , and x - ray , we analyzed the composites micro - structure ; we studied the dispersion methods & the mechanism of damage of the fiber ; we also did research on the reinforced mechanism and the fabrication characteristics of the fcmc
  测试烧后试样的常温耐压强度、常温抗折强度、体积密度、气孔率，并借助于光学显微镜、扫描电镜以及x射线衍射图象对复合材料微观结构进行了分析，探讨了复合材料中纤维的分散方法、纤维的损伤机理、纤维增强al _ 2o _ 3复合材料的增强机理和及制备特性。