弹簧止回阀的英文

• spring loaded check valve
• spring-loaded check valve

• "弹簧"英文翻译    spring; mechanical spring
• "止回阀"英文翻译    check valve; check-valve mou ...
• "止回阀弹簧" 英文翻译 :    check valve spring; check-valve spring
• "止回阀杆弹簧" 英文翻译 :    check valve lever spring; check-valve lever spring
• "止回阀球弹簧" 英文翻译 :    check valve ball spring; check-valve ball spring
• "弹簧加载止回阀" 英文翻译 :    spring-loaded check valve
• "弹簧球式止回阀" 英文翻译 :    spring ball check valve
• "止回阀" 英文翻译 :    [工业] check valve; check-valve mounting bracket; one-way valve; clack valve; clappet (valve); inverted valve; non-return flap valve; non-return valve; return flow prevention valve
• "弹簧止动环" 英文翻译 :    spring stop ring
• "弹簧止水夹" 英文翻译 :    spring water stopper
• "弹簧止动垫圈" 英文翻译 :    curved spring washers
• "瓣式止回阀" 英文翻译 :    clack
• "泵的止回阀" 英文翻译 :    pump check valve
• "衬里止回阀" 英文翻译 :    lining check ales; lining check valves
• "充气止回阀" 英文翻译 :    charging check valve
• "出口止回阀" 英文翻译 :    outlet non-return valve
• "单向阀，止回阀" 英文翻译 :    check valve
• "单向止回阀" 英文翻译 :    one way stopeturn valve
• "单止回阀" 英文翻译 :    single check valve
• "挡止回阀" 英文翻译 :    flapper valve
• "底部止回阀" 英文翻译 :    foot retaining valve
• "电动止回阀" 英文翻译 :    motorized non-return valve
• "蝶式止回阀" 英文翻译 :    butterfly check valve; butterfly swing check ale; butterfly swing check valve
• "防暴止回阀" 英文翻译 :    storm non-return valve
• "风管止回阀" 英文翻译 :    check damper

• Torsion spring checks shall have reversible elastomer discs and in operation produce drip tight closure against reverse flow caused by backpressure or backsiphonage
  扭力弹簧止回阀应该配置双向合成橡胶阀瓣，并且在工作时对于反压力和反虹吸所产生的回流具有防滴漏关闭性能。
• The reduced pressure detector assembly shall consist of two independent torsion spring check modules , a differential pressure relief valve located between and below the two modules , two drip tight shutoff valves , and required torsion spring check modules and relief valve shall be contained within a sleeve accessible single housing constructed from 304 ( sch 40 ) stainless steel pipe with groove end connections
  这种减压检测器总成应该包括两个独立扭力弹簧止回阀模块，一个位于两个模块之间的下方的差压安全阀，两个防滴漏关闭阀，并且要求扭力弹簧止回模块和安全阀应该放置在一个套筒内，要易于接近带沟槽连接的304 （目录40 ）不锈钢管的单个外壳。