成型模的英文

• bending die
• contoured die
• forming block
• forming die
• forming mould
• progressive die

• "成型"英文翻译    shaping; forming
• "模"英文翻译    mould; pattern; matrix
• "成型模膛" 英文翻译 :    forming impression
• "成型模注" 英文翻译 :    shaping moulding
• "火腿成型模" 英文翻译 :    forming box
• "快速成型模" 英文翻译 :    rapid prototype tool
• "螺帽成型模" 英文翻译 :    nuts formers
• "速成型模" 英文翻译 :    rapid prototype tool
• "箱形成型模" 英文翻译 :    box forming die
• "预成型模具" 英文翻译 :    preforming tool
• "自由成型模" 英文翻译 :    free forming die
• "纵包成型模" 英文翻译 :    folding tool
• "滚压成型模具" 英文翻译 :    roll forming die
• "预成型模塑法" 英文翻译 :    form-and-mold process; form-and-mould process; preformed matched die
• "真空成型模型" 英文翻译 :    vacuum drawn model; vacuum-drawn model
• "耐冲螺丝成型模具" 英文翻译 :    fastener forming dies
• "塑料成型模具术语" 英文翻译 :    terminology of mould for plastics
• "车轮坯成型模锻压力机" 英文翻译 :    wheel forging press
• "型模" 英文翻译 :    pattern die; pattern draw; section mould
• "成型" 英文翻译 :    shaping; forming 爆炸成型 explosive forming; 冷滚成型 cold roll forming; 这箱子被压得不成型了。 the box was crushed out of shape
• "雏型模" 英文翻译 :    blank mold
• "单型模" 英文翻译 :    die single-impression; die, single-impression
• "定型模" 英文翻译 :    calibrating die; calibration die; fast tool
• "多型模" 英文翻译 :    die multiple-impression; die, multiple-impression
• "挤型模" 英文翻译 :    extrusion die

• Research into material - selecting for the lining of shaping die of funnelled brick
  漏斗砖成型模内衬选材研究
• Recommended practice for voltage endurance testing of form wound bars and coils
  成型模绕棒和线芯的耐压试验的推荐实施规程
• Nut forming dies
  螺帽成型模
• The fracture is brittle fracture , and the reason is that material of forming dies takes place the temper brittleness
  引起脆性断裂的原因是成型模产生了回火脆性。
• By programs , diamond circular blade is used to process the surface of irregular shape stones , including straight and curved states , various embossments
  可通过自行编制的程序，实现石材表面的数控加工，粗加工无需靠模板，精加工无需成型模轮。
• The results show that the fracture surface is characterized by a combination of most intergranular brittle regions and a few cleavage regions , and there are finer precipitations on grainboundaries
  结果表明，成型模裂纹断口形态呈沿晶特征，沿晶面上有细小析出物，为脆性断裂。
• The fracture reasons of forming dies , which cracked during forming process of cranks , were analyzed by means of chemical composition analysis , metallographic examination and fracture analysis in this paper
  摘要采用化学成分分析、金相检验和断口分析等方法，对开裂的成型模进行了分析。
• Dlc coatings have wide applications in various tools , moulds , machining tools such as drills , mills , cd moulds , punching moulds , moulds for plastics , glass and magnesium alloys
  Dlc膜可广泛应用于各类工具、模具和刀具，如钻头、铣刀、光盘模具、冲模、塑料成型模、玻璃成型模和镁合金加工模具等。
• This machine is mostly used for rubber has been comminuted with glue water whipping and middling , and pass foaming shapes up template , through oil press system having it beenpressed homologized demand density reprocessed foam rubber
  本机主要用于将已经粉碎的泡绵与胶水搅拌混合，再经过发泡成型模，经油压系统压成相应要求密度的再生泡绵。
• Samples are made first by mixing dry bentonite with sand in different proportions , by weight . the percentages of bentonite in the mixture are 10 % , 15 % and 20 % respectively . and then a little water was added to the mixture ( about 3 % by weight ) and mixed thoroughly until the mixture is uniform
  试样的制备：首先将砂和膨润土按不同质量比进行混合，膨润土占混合物的比例分别为10 、 15 、 20 ；然后在混合物中加入少量的水，占混合物的3 ；然后充分混合直到混合物均匀；在成型模中锤击混合物，按5层捶击，制成试样。

• 成型模的法语：estampe d'emboutissage