成形极限图的英文

• forming limit diagram

• "成形"英文翻译    take shape; engender; formin ...
• "极限"英文翻译    the limit; the maximum; the ...
• "图"英文翻译    picture; chart; drawing; map
• "成形极限" 英文翻译 :    forming limit
• "变形极限" 英文翻译 :    deformation limit; limit of deformation
• "变形极限区" 英文翻译 :    dlv deflection limitin volume
• "变形极限状态" 英文翻译 :    deformation limit state
• "弹性变形极限" 英文翻译 :    elastic deformation limit
• "重心位置极限图" 英文翻译 :    balance limit chart
• "工字形极限卡规" 英文翻译 :    i-gauge
• "塑限图" 英文翻译 :    plasticity chart
• "无限图" 英文翻译 :    infinite graph
• "象限图" 英文翻译 :    quadrantal diagram
• "环形极" 英文翻译 :    ring pole
• "针形极" 英文翻译 :    pin-shaped electrode
• "锥形极" 英文翻译 :    tapered pole
• "局部有限图" 英文翻译 :    locally finite graph
• "受限图灵机" 英文翻译 :    restricted turing machine
• "四象限图" 英文翻译 :    four quadtant diagram
• "误差限图" 英文翻译 :    error bar
• "线性有限图" 英文翻译 :    finite linear graph
• "有限图, 有穷图" 英文翻译 :    finite graph
• "变形极化率" 英文翻译 :    deformation polarizability; deformation polarization
• "长方形极" 英文翻译 :    oblique pole
• "卵形极光" 英文翻译 :    auroral oval

• Application of coordinate net analysis technology and forming limit diagram
  坐标网分析技术与成形极限图的应用
• Fld sheet metal formability and test methods - forming limit diagram test
  金属薄板成形性能与试验方法成形极限图
• This paper overviewed the prediction methods of forming limit in sheet metal forming , which included forming limit stress diagram , the maximum forming thinning ratio , forming limit diagram and ductile fracture criteria ( dfc )
  摘要对板料成形中的成形极限应力图、最大变薄率、成形极限图以及韧性断裂准则等预测成形极限的方法，进行了综述和分析。
• The finite element numerical simulation analysis is an important method to predict sheet metal instability in the sheet metal forming process . and the current general - purpose finite element codes all choose the strain - based forming limit diagram as the instability criterion , which has the limitation of correlative to the strain path . thus it is very inconvenient to study sheet metal forming under complex strain paths
  有限元模拟是板料成形过程中预测板料失稳的重要手段,考虑到当前通用的有限元软件都是以存在应变路径相关性缺陷的基于应变的成形极限图为失稳判据,以致在研究复杂应变路径板成形时极为不便。