折转角的英文

• turning angle

• "角"英文翻译    role; part; character
• "激波折转角" 英文翻译 :    shock deflection angle
• "气流折转角" 英文翻译 :    fluid deflection
• "叶型折转角" 英文翻译 :    camber angle
• "折转" 英文翻译 :    replicate; replication
• "转角" 英文翻译 :    corner; diversion; street corner; nook
• "可折转" 英文翻译 :    reflexibie
• "折转板" 英文翻译 :    deflector
• "折转的" 英文翻译 :    replicate
• "折转流" 英文翻译 :    deflected flow
• "可折转头部" 英文翻译 :    swing nose
• "空气折转板" 英文翻译 :    air screen
• "向下折转" 英文翻译 :    turn down
• "折回 折转 反叠 仿制" 英文翻译 :    replicate
• "折转频率" 英文翻译 :    break frequency
• "折转试其手" 英文翻译 :    shoulder reduction test
• "爱转角" 英文翻译 :    dj jerry remix; yabu
• "刀转角" 英文翻译 :    swivel angle
• "翻转角" 英文翻译 :    flip angle
• "滚转角" 英文翻译 :    roll angle
• "回转角" 英文翻译 :    angle of revolution; angle of rotation; angle of turning; circle reverse
• "基转角" 英文翻译 :    elementary angle of rotation
• "急转角" 英文翻译 :    zag
• "扭转角" 英文翻译 :    angle of distortion; angle of thread; angle of torque; angle of torsion (angle of twist ）; torsion angle; twist angle
• "偏转角" 英文翻译 :    angle of defection; angle of deflection; angle of deviation; angle of rotation; angle of yaw; angle deflection; angular deflection; castoring angle; declination angle; deflection angle; excursion; inflection angle; skew angle; swing angle; yaw angle

• A numerical simulation was performed to analyze the effect of bowed blades on the separation structures in a high - turning compressor cascade
  摘要通过数值模拟，分析了叶片周向弯曲对大折转角压气机叶栅内分离结构的影响。
• A numerical investigation about effects of boundary layer suction in low - speed compressor stator cascade with large turning angle was carried out
  摘要本文采用数值方法研究了低速条件下附面层抽吸对大折转角矩形叶栅流场的影响。
• Experimental studies on the influences of the deflected plates upon the oscillations were focused on the attenuations of sound pressures of the oscillations with the bent plates of various angles and lengths . the results show that the bent plates with angels of 30 ~ 60 and a length about an oscillating wavelength diminish the sound pressures notably . with the same angle of 45 , the half - wavelength bent plates diminish the pressures , and the one - wavelength or longer bent plates do better
  结果表明，当折转角为30 60和折转长度( b )与振荡波长( )相当时( b / 1 . 0 ) ，折板具有显著的削弱振荡声压的效果；折转角45时，折板长度与振荡基频波长之比b /在0 . 5 ，折板就有削弱振荡声压的效果， b /在1 . 0或更大时削弱效果更佳。
• In this dissertation , a hybrid optimization approach for automatic design of 3d turbine blades was proposed and well implemented . the applications to the stacking design optimization and full 3d aerodynamic design optimization for an annular cascade demonstrated the validity , robustness and efficiency of this hybrid approach
  本论文提出和实现了一种适用于叶轮机械全三维气动优化设计的方法，并利用该方法对某低展弦比、大折转角的环形叶栅分别进行了基迭优化和全三维气动优化。