显气孔率的英文

• apparent porosity
• porosity

• "显"英文翻译    apparent; obvious; noticeabl ...
• "焦炭显气孔率测定方法" 英文翻译 :    coke-determination of show porosity
• "表观孔隙率 表观气孔率 显气孔率" 英文翻译 :    apparentporosity
• "气孔率" 英文翻译 :    porosity rate
• "闭口气孔率" 英文翻译 :    closed porosity; closedporosity
• "闭气孔率" 英文翻译 :    closed pores
• "表观气孔率" 英文翻译 :    apparent porosity
• "大气孔率" 英文翻译 :    macro porosity; macroporosity
• "开气孔率" 英文翻译 :    open pores
• "烧结气孔率" 英文翻译 :    sinter porosity
• "体积气孔率" 英文翻译 :    bulk porosity
• "微气孔率" 英文翻译 :    micro porosity; microporosity
• "稳气孔率" 英文翻译 :    sealed porosity
• "隐气孔率" 英文翻译 :    closed porosity
• "真气孔率" 英文翻译 :    true porosity
• "轴芯气孔率" 英文翻译 :    axial porosity
• "总气孔率" 英文翻译 :    total porosity
• "多孔性，气孔率，气孔巢(铸疵)" 英文翻译 :    porosity
• "孔率" 英文翻译 :    aperture ratio; porosity; void content
• "焦炭假相对密度及总气孔率测定方法" 英文翻译 :    coke-determination of apparent relative density and total porosity
• "染料渗透试验法(测定陶瓷气孔率)" 英文翻译 :    dye absorption
• "炭素材料真气孔率测定方法" 英文翻译 :    carbon materialsdetermination of the true porosityty
• "体积密度和真气孔率试验方法" 英文翻译 :    shaped insulating refractory products-determination of bulk density and true porosity
• "气孔" 英文翻译 :    [矿物学] blowhole; [植物学] stoma; [动物学] spiracle; pore; stigma; [冶金学] gas hole; gas pocket; [建筑] air hole
• "穿孔率" 英文翻译 :    percentage of perforation; perforation percentage; punching rate

• Carbon materials . determination of open porosity
  碳素材料显气孔率的测定
• Test method for apparent porosity and bulk density of porous ceramic
  多孔陶瓷显气孔率容重试验方法
• Coke - determination of show porosity
  焦炭显气孔率测定方法
• Test method for bulk density , apparent porosity and true porosity of dense shaped refractory products
  体积密度显气孔率和真气孔率试验方法
• Test methods for apparent porosity , apparent specific gravity , and bulk density of graphite electrodes
  石墨电极容积密度表观比重和显气孔率的测定方法
• Test methods of ceramic tiles - part 3 : determination of water absorption , apparent porosity , apparent relative density and bulk density
  吸水率显气孔率表观相对密度和容重的测定
• Test method for properties of investment casting ceramic core - part 1 : determination of apparent porosity , water absorption and bulk - density
  熔模铸造陶瓷型芯性能试验方法第1部分:显气孔率吸水率和体积密度的测定
• Ceramic tiles - part 3 : determination of water absorption , apparent porosity , apparent relative density and bulk density iso 10545 - 3 : 1995 , including technical corrigendum 1 : 1997 ; german version en iso 10545 - 3 : 1997
  瓷砖.第3部分:吸水率显气孔率表观相对密度和容重
• Study on the synthesis of corundum - mullite - gahnite multiphase materials by one - step sintering process using kaolinite showed that corundum - mullite - gahnite multiphase materials with the apparent porosity less than 5 % can be obtained through sintering at 1700 for 3h
  在1700下保温3h ，能够一步合成出显气孔率在5以下的刚玉?莫来石?锌铝尖晶石复相材料，各物相间结合紧密，发育较好。
• Along with the rising of sintering temperature and the increasing of heat preservation time , the porosity and water absorption reduced , the density and bending strength increased , the bending strength was mostly estimated by the porosity
  随着烧结温度的升高和保温时间的延长，显气孔率和吸水率逐渐减小，体积密度逐渐增加。抗弯强度随着烧结温度的升高和保温时间的延长而增加，多孔烧结体的强度可以主要通过气孔率来判断。